- 09 April 2021 (93 messages)
-
another thing we can tackle later is, my menu doesnt even have that QR code inn the top right, it only has the horizontal lines, with the menus "change wallet address" "view wallet address" "scan QR code" "send" "receive" "issue token" etc
-
not sure i need to keep going.
-
i have to run out for an hour or two but will be back! can check my phone every now and then and hopefully give info to help. appreciate all the help and so sorry for the braindead questions, very new to this :x
-
Sounds like you should be using freewallet.io DESKTOP wallet, which is what the screenshots are from
-
.....that is definitely the issue because as I was leaving I realized it said mobile. God I am so sorry that is indescribably dumb
-
Not braindead questions.... the mobile wallet is old and supports sends, but does not support sweeps... so, if you want to sweep and move everything in one transaction, you will need to use freewallet.io desktop
-
Will try the steps when I’m back home :) ty so much
-
Not a big deal.. the 12-word passphrase you wrote down is portable between wallets 🙂
-
you can also use that same 12-word passphrase on rarepepewallet.com 🙂
-
Excellent! Ty so much! Will make sure to try that when I get back home and will check in later :)
-
Today I am announcing the fifth piece of BLACKBOX artwork BLACKBOX.2021.Probit_Listing with the goal of funding a XCP/BTC Listing on the Probit (Probit.com) exchange.
300 BLACKBOX.2021.Probit_Listing tokens are now available at a cost of 0.001 BTC per token (~$60 per token, 0.30 BTC Total)
You can make a donation to bc1qedrgx00d68cpc3h8zrwdtvms88yk6nmvzs4dg6 and get some BLACKBOX.2021.Probit_Listing tokens from the dispenser at https://xchain.io/tx/1559084
Donations of any amount are accepted and appreciated. However, only donations of at least 0.001 BTC will receive a BLACKBOX.2021.Probit_Listing token from the dispenser/vending machine.
Token artwork will be revealed at some future date after the BLACKBOX is fully funded and exchange listing goes live.
There is a 2 week time limit to raise these funds. -
None
-
-
You all have said you want to be on good exchanges... here is your chance to contribute to making that a reality.... I believe this Probit listing and the community outreach manager will probably be the last BLACKBOX projects for a little while, as once we get the new listing live, I think we should really switch focus to building our community and establishing regular developer meetings, newsletters, documentation, FAQs, etc.
-
Thanks jdog I will send u something shortly . I am working on a collab with a big cryptoartist that involves a certain rare pepe - we are going to give a portion of proceeds from sale to helping fund rarepepewallet/xcp
-
Awesome news! 🙂
-
That's cool! 👏
-
Nice!
-
hey jdog, having trouble uploading scrillas wallet to freewallet. when i go to "options" > "import private key", i type in the seed phrase and its giving me a "Unable to import the private key you have provided!"
-
private key and seed phrase are not same thing
-
ah i figured
-
seed phrase is 12 word passphrase.... private key is a private key for a specific address
-
i have access to scrillas wallet only thru rarepepewallet, how do i find the private key?
-
or is there a way to import via seedphrase instead?
-
can login to counterwallet.io usin same passphrase (12 words) as in rarepepewallet.com.... then you can see address with rare pepes and export private key
-
or just logout entirely from freewallet.io desktop... and then login with the same 12-word passphrase as rarepepewallet.com 🙂
-
just make sure you always write down your 12-word passphrases before logging out entirely.... you lose the 12 word passphrase, you lose access to the wallet/funds
-
ok excellent! so basically i made MY free wallet (wrote down the passcode), and now im logging out entirely, and logging into scrillas wallet with the passphrase i cracked, sweeping the account, and sending it to MY freewallet i made
-
just to confirm
-
yep, that sounds correct 🙂
-
Lemme know when it’s safe to announce yer the winner - wanna make sure it’s swept first
-
will do! sending some XCP to the wallet so it can sweep right now :)
-
20 mins maybe
-
hmm, speaking of, anybody know where to buy XCP? can i do it straight through freewallet?
-
you can buy from decentralized exchance (DEX), dispensers, dex-trade.com, vindax.com, and soon probit.com
-
Send me yer address I’ll send u an xcp
-
Do u need xcp to sweep in freewallet @jdogresorg ?
-
ty, was trying to sign up right now lol. i guess it would be sent to your wallet, since thats the one im sweeping?
-
1M3tNZsVo9rCttr6JZCNpYgMdv93RwnHAU
-
Yes, sweeping requires a bit of XCP as an anti-spam mechanism
-
yup, 0.5 i think
-
Ok kool
-
Sending now
-
Buying xcp is a bit hard for new ppl, Well ease u in
-
also ... FYI.. the sweep does not move the BTC from the address... you will have to do that separately
-
i sent $30 in BTC to it because i wanted to make sure after fees i was good to send, but i dont think i see any other BTC on here?
-
so should be fine if i just send the remaining BTC to my new freewallet
-
👍
-
sent .5 xcp Joseph
-
so i see the XCP in the history, but im still getting the error? do i need .5 in my other wallet too, @jdogresorg ?
-
it hasn't arrived yet.... it is in a pending transaction... once scrilla's send completes, THEN you will have some XCP and you will be allowed to generate the transaction
-
oh ok! saw it in my freewallet history so assumed it was there. i will wait :)
-
You could use multi-send or create 3 separate transactions as well
-
-
-
Make sure your server serttings match what is in the above screenshot... also make sure your firewall or anti-virus/malware software is not preventing freewallet from communicating with the API server.... servers are up and working fine, so shouldn't be having any issues.
-
-
-
@jdogresorg @scrillaventura , said the sweep went through and is being sent to the block!
-
not sure if i should log out of scrillas wallet and log into my freewallet i sent it to?
-
or wait
-
hi there,
is there a DeFi project where we can provide wXCP and WAVES to liquidity pool? -
its transferred!
-
@jdogresorg @scrillaventura cant thank you two enough. so sorry for all the questions. you guys have the patience of saints and seriously appreciate you both
-
try xcp-gateway.io
-
- 10 April 2021 (18 messages)
-
All g! Congrats
-
do i need to know news about token triggers (trig)?
-
Hey everyone, it's 16.25 hours until the first of our ongoing fortnightly online livestreamed auctions...
Inspect the Lots and register to bid at https://roaringauctions.com/
The action will happen in @WTHAuctionHouse this time and will move across to @RoaringAuctions in two weeks time. -
I updated to this but with .png and it’s still not showing up on xchain. Does it take a while or did I mess up by not using .jpg?
-
Can you post link to asset on xchain
-
what does sweep do?
-
-
sweep moves all your assets and transfers ownership of any assets in your address to a new address.... its basically a moving van to move all your stuff from one address to another address 🙂
-
You still have .com in the description. Also, when I look at the image on Imgur, it shows no title. I’m not 100% sure that’s crucial, but you should update the name on Imgur to match the description’s name too.
-
Need to take out the .com
-
This issue we are seeing on Ethereum blockchain with NFT's being switched. Is that a problem using Imgur?
-
Can we point img storage to a flashdrive?
-
-
-
-
-
-
- 11 April 2021 (28 messages)
-
Can’t wait to see this 👍
-
I’m trying to use FreeWallet to make a donation... I cut’n’paste
bc1qedrgx00d68cpc3h8zrwdtvms88yk6nmvzs4dg6
but it says “you must enter a valid address” -
Ahh... yeah you must be using freewallet mobile... which does not support segwit addresses yet.... try sending from freewallet.io desktop wallet or counterwallet.io
-
Appreciated... will do 👍
-
-
Got one.
-
What's this?
-
-
It’s surprising to me the little support and excitement CP gets from Bitcoin advocates.
It did take him 8 years to FOMO into Bitcoin so eventually he might FOMO into CP. -
Ahhh. Got it thank you again!
-
They actively disliked Counterparty iirc. For spamming and bloating the chain
-
-
Two on the DEX for 500xcp each open, missed the 20xcp each orderthat came out after, already filled. Great card.
-
-
massive event for the bitcoin pepes
-
please share
-
😍
-
I believe everyone eventually will
CounterParty will be to Bitcoin what Linux is to the Internet
It’ll be behind 3/4 of all layer 2 platforms -
This kind of use will force innovation
-
Going to be huuuge... love it 😍
-
I think the protocol the way it is right now is great. I think innovation for side chains, etc... but the core of CP seems pretty complete. I don’t think the functionality of CP is holding us back as it stands right now.
-
Shared, great PR
-
yes!
-
Shared too
https://twitter.com/hodlrdotrocks/status/1381376978318733314?s=21Chiefmonkey 🍊💊👍 #FreeAssange #Privacy #bitcoinOh Dear God... a true piece of bitcoin history RAREPEPE | @scarcedotcityscarce.city/products/RAREP…
-
What do you think is holding it back?
-
Is anything holding it back?
What’s mostly needed right now? -
Eyes. Ease of use. I like that you say it will be 3/4 of layer 2 platforms.
CP is the ultimate accounting standard for layer 2 solutions.
You can have the world’s most shitty non secure centralized application, but if all those assets or NFTs are secured in a CP wallet, it doesn’t matter. Obviously as long as the wallet operator and withdraw process follows a good security standard. -
The accounting standard is what I like. You can see who holds what and account for the total supply at all times secured by the worlds most secure network.
I don’t think sends will be common on CP for peeps like us in 10 years, but the power of being able to verify centralized and decentralized apps holdings is powerful.
Everything will link back to Bitcoin using CP hopefully. - 12 April 2021 (14 messages)
-
Agree. I think Joe said it the best when he said something of the sort that Cryptopunks was the result of VCs + NFTs.
I’m skeptical if he really cares about the tech or just the $$$ to be made.
My new idea since I don’t have the skills to build a sidechain is to make an NFT trading card company.
Pretty easy to mail a trading card and get a new user 😂 -
hello guys, is anybody familiar with free wallet and can offer some quick assistance?
-
Yes dm me
-
Shouldn’t say new idea. Obviously lots of people have done it before. My new little project 😆
-
Yeah compared to SOV atm...
-
Ecosystem funding FTW ! Thanks !
-
-
5x449
-
-
#24 - New release, OmniBOLT, Bitcoin Culture and much more!
⚡ Everything at the intersection of the Lightning Network & Finance
-
-
-
No, I don’t think so. Both use Bitcoin. Sounds pretty cool.
-
- 13 April 2021 (36 messages)
-
Omni is a completely separate project from Counterparty.
-
how's everyone going tonight/today?
-
good, and you? getting ready for a new ATH tomorrow
-
We're going to $100!!! >?>? :)
-
I suffered weak hand syndrome few years back that time we almost hit $100... somehow let go of almost all my XCP ~ $82 USD :(
-
making amends now, been buying back in
-
$10 feels like about the right level for XCP to me... but then I'm one of those strange people who thinks Eth should be $10 as well. It's supposed to be EVM fuel, not a global casino coin :)
-
and XCP for minting assets, $5 feels accessible while also preventing asset spamming
-
as long as we're cheaper than minting ERC721's we're in a good place IMHO
-
-
-
-
-
-
mmmm interesting
-
So far, only seven people care about listing Probit exchange.
-
I cared multiple times
-
-
I agree with you
-
-
-
-
-
What do you think of the idea of having a decentralized collection of NFT cards where holders of the NFT vote on the next issued NFT? Is there something like that or better already out there?
-
-
There was a "PepeVote" project created by @Needmoney90 which did just that.... allowed existing PEPE card holders to vote on cards to be included in a new directory.... but, project died..... I'm working on something, but its a few months out from being ready for preview/release.
-
Fixed your permissions Keith so your links don't get auto-deleted now 🙂
-
thanks :)
-
I'll check out PepeVote.
-
Pepevote Official
A democratized digital art curation platform
-
I was just going t o say, 6 years ago I made my first ever program https://github.com/keithagroves/The-Chain-Gang. It was a protocol to issue assets and vote using burn addresses. It had no application at the time and the code is terrible, but I thought something like that might work for an NFT collection.GitHub - keithagroves/The-Chain-Gang: A protocol to use assets as placeholders
A protocol to use assets as placeholders. Contribute to keithagroves/The-Chain-Gang development by creating an account on GitHub.
-
Bitcorn's CROPS distributed votes based on your holdings as CROPS.VOTE... You'd send you vote token to a 1VOTE address with a memo of which candidate you were voting for, which they would be on the foundation that judges new cards among other things.
-
interesting, thanks for sharing.
-
-
I cared 👍
I’m surprised XCP isn’t on a load of exchanges
Has anyone tweeted it out?
More than happy to give it a push and retweet an official message if you want to focus the attention 👍 -
Its a pay to play game now.... only reason Counterparty is listed on any exchange besides Zaif (in Japan) is because I've spent the last few months contacting exchanges and working to get their listing price, work their listing price down, collect the listing fee from the community, etc..... YES, we would love to be on lots of exchanges, but its not something that just materializes from a tweet.... takes lots of work in the background to make a listing happen...... Currently we have an offer to list on Probit.com and are collecting the listing fee..... if you want to help out, contributing to that listing fee would greatly help..... We have Tier-3 listings... with Probit, we will have a Tier-2 Listing... next level listing after that is Tier 1 exchange (Coinbase, Binance, etc).
- 14 April 2021 (70 messages)
-
Stuck at signing sounds like internal wallet issue (not able to find correct private key using index)...... download latest version... reset/logout of wallet entirely, then restore using you 12-word passphrase
-
I do understand 🙏
And I contributed yesterday
I’m just surprised that CP doesn’t get an automatic entrance into some of the exchanges because of its place in bitcoin history
I know a single tweet isn’t going to cut it... but a sustained tweet storm focussed on Binance would go a long way
Call me optimistic but I wouldn’t be surprised if Binance wavered their fee... you’re not a startup and you’ve got one of the longest track records
It’d be a positive piece of PR for them -
Only have heard of the issue with signing from users who are logging in and out of wallet using multiple 12-word passphrases, which freewallet.io is not really meant to do
-
Thanks for the donation/support😀👍🏻 Happy to retweet/like any efforts if you’d like to try to get it on binance radar.... I’ve emailed, filled out listing paperwork, and had a couple people who claimed to know CZ reach out to him.... all with no response/success so far.... can’t hurt at this point to try something else to get their attention 👍🏻
-
Settings don’t matter when it comes to signing
-
Issue is in wallet
-
Read instructions I already gave... it will fix issue
-
The server settings are only for GENERATING and counterparty transactions... signing the transaction happens entirely in the wallet and is 100% independent of the server settings... the ONLY time I have heard of signing issues is from people who have been signing in and out of frewallet using their 12-word passphrase a bunch.... freewallet.io is not counterwallet.io and you should not be using multiple passphrases to login.... freewallet.io is meant to be used with ONE 12-word passphrase... if your having issues signing, please reset the wallet (logout entirely and close it)... then start it fresh with your 12-word passphrase.. then try signing again.
-
Paid twitter ad campaign, staring Pepe of course, and narrow down the target audience to just CZ
You could be the only ad he sees all week 😁 -
Cool, go for it 🙂
-
good question... should be in the FAQ... here is the answer
-
Freewallet.io is meant to use ONE 12-word passphrase seed... it is not meant to be switching back and forth between multiple 12-word passphrases... as initializing the wallet is an intensive process and doing it multiple times can result in some corrupted keyindexes (not able to sign transactions cuz cant find private key based off index)..... if you want to use multiple wallets with multiple 12-word passphrases... you can do so in freewallet, but do not do so by switching passphrases again and again..... simply login to wallet #1 and use it normally.... for your second 12-word passphrase, login to counterwallet or freewallet.io and dump all of the private keys from addresses you want to use in your second wallet..... then import them into freewallet... PRESTO.. able to use all your addresses in a single freewallet.io instance without having to keep logging in/out and switching 12-word passphrases seeds
-
TLDR... freewallet.io is only meant to be used with one 12-word passphrase... for others, export private keys and import into freewallet
-
Munehisa ^^
-
if you continue to have issues, DM me and i'll walk ya through resetting the wallet through the debugging interface... AFK for a bit.. putting son to bed now
-
No troubles 👍
-
-
Please tell me that Counterparty-lib 9.59.0 's Release note say that Replaced indexd backend with addrindexrs . This means that indexd -server will not be used in the future
-
??
-
That is correct... addrindexrs is much more efficient and has a smaller disk footprint than indexd did
-
-
same
-
-
-
-
-
-
i did a mpma send, but xchain doesn't seem to recognize it
-
https://xchain.io/tx/deca30d8c20948ef409aa82ad2dc85802a4095f8b09b91d5a186e77260941ebe
https://blockstream.info/tx/deca30d8c20948ef409aa82ad2dc85802a4095f8b09b91d5a186e77260941ebeBlockstream Block ExplorerBlockstream Explorer is an open source block explorer providing detailed blockchain data across Bitcoin, Testnet, and Liquid. Supports Tor and tracking-free.
-
A couple, and I dunno
-
I am able to switch between multiple imported wallets with no problems. have been able to for a few years now
-
I can help as well
-
-
Sometimes it doesn’t show up on xchain right away when the network is busy. 93,000 unconfirmed transactions currently.
-
👍
-
when btc moons the mempool gets clogged
-
kind of annoying 😂
-
-
Consider yourself lucky then... the wallet SHOULD work fine switching between passphrases, but seems like some users have issues with doing that... only time I have heard of issues with signing transactions is from users who have done the multiple passphrase signin/out thing a bunch.
-
Strange.... if you do the MPMA send again, please keep track of the exact list you sent to, and take screenshots of the process.... I have also had an MPMA transaction that should have gone through just disappear... I believe it might be a parsing issue in CP in some special cases, but need to be able to reproduce issue to verify.... haven't been able to verify anything yet..... try again and DM (Direct Message) me if you have any issues
-
It’s happened to me. Not a problem, just some of the addresses stayed in cache from a different passphrase and the private key was missing.
Just logged out , switched passphrases and worked. -
well it seems that xchain doesn't show any txs younger than 10 hours right now
-
my unconfirmed tx is recognized by the blockstream explorer
-
xchain is up to date
-
-
So again, please try your send again and send me the details in DM as requested if you have issues
-
Yes this is monegraph. Now being recognised as the first people to attempt to back art with a token. See here https://link.medium.com/7iZ4aIrYrfbThe Early Evolution of Art On The Blockchain — The Road to NFTs — Part 1
There’s many histories of Art on the Blockchain out there. Here I analyse the very early evolution leading almost up to mass adoption…
-
To clarify, I don't sign out and in, but switch between multiple imported wallets
-
switching between imported addresses is fine.... swithcing between multiple 12-word passphrases is not 🙂
-
Earliest work of token representing art
-
Ok. I'm willing to show anyone the correct way of switching as to not to burden your time with PMs on this topic
-
-
Thx... answering any questions about having issues signing in freewallet would be great.... only issue with signing that I am aware of is missing private key cuz of corrupted index cuz of multiple passphrase use...... if you hear someone saying they are having signing issues in freewallet, 99% sure it is the cause 🙂
-
Yes. Exactly. This has happened to me. But the private key was only missing because the address was cached from a different passphrase I used in freewallet.
So I logged out of freewallet, singed back in with the other passphrase, and the private key was present. -
-
what if you import a private key
-
then if you reset the wallet and reenter your seed, you'll have to import the other priv key again, right?
-
I believe so... yes.... the wallet was not really meant for switching back and forth between 12-word passphrases.... but it should do 100% fine if you just enter one passphrase and then import private keys for the other addresses.
-
ok
-
it'll be in a few months when my vanitygen is done
-
Sounds like a very vain address
-
oh yes indeed
-
6 characters
-
case sensitive
-
-
-
there's probably a way to convert priv keys to seed phrases, but i don't know
-
the recommended thing is to import priv key, the wallets apparently don't like when we switch around all the time
-
-
It's just way easier to print a seed
And then restore it - 15 April 2021 (44 messages)
-
thanks. J-Dog.
-
please tell me how to write addrindexer's conf file ( addrindexers.toml ) . I don't know how to write and what I should write in config file ( addrindexers.toml ) .
-
I searched . but , I didnt find a article about addrindexer's conf file .
-
-
There is no config file for addrindexrs as far as I know.... if you setup a fednode, all the services should be automatically configured to communicate with one another, so no need for an addrindexrs config file 🙂
-
thanks . J-DOG. I wanna use fednode , but I can't use fednode , because of my team's problem . So , I need to set up addrindesers without fednode.
-
I haven't setup addrindexrs outside of a fednode before... but this should help point you in the right direction... the docker config for addrindexrs
-
CounterpartyXCP/federatednode
Federated Node Build System. Contribute to CounterpartyXCP/federatednode development by creating an account on GitHub.
-
J-Dog . I can’t thank you enough!!!
-
-
e.g. https://xchain.io/tx/89f13e547431e48c58c287d5751068d4a7af9dc24fb38ecf2191daf198d71c4d
https://blockstream.info/address/1AW3xZifaa9TdLzijrt7N8LW5fZ5EM8cnBBlockstream Block ExplorerBlockstream Explorer is an open source block explorer providing detailed blockchain data across Bitcoin, Testnet, and Liquid. Supports Tor and tracking-free.
-
Yes, I put out a freewallet release last month that allows you to setup a dispenser on a new/unused address.
-
-
-
-
-
-
Freewallet dispenser interface..... just put empty/new address in "dispenser" field... funds are taken from source, and dispenser is setup on dispenser address
-
only works on new addresses with no balance
-
^^ check above
-
Dispenser creation is working just fine you got to use the gears icon and then create dispenser I just made one yesterday it’s working fine for PepeCash for BTC: https://xchain.io/tx/81d0484b044288263b72a8acb3541987415ea1d8405428fca108feead77ddaff
-
-
-
-
I guess that’s the point, but I didn’t expect a $1 each tx send in MPMA to confirm faster than a $4 single send. Was just thinking about dollar cost per send, not possible speed confirmation
-
-
Scarce.City
💥LIGHTNING⚡️AUCTION💥🔥🐸RAREPEPE🐸🔥 ***stored on an @OPENDIME w/ a custom PEPE themed @CryptoCloaks case*** By Mike @myrarepepe; from @wasthatawolf 's collection ⌛️24 hour auction begins Thursday at 18:00 UTC, 2:00pm ET⌛️scarce.city/products/RAREP… 👇Details 👇
-
I would like to sweep an address in FreeWallet but it tells me I need 0.5 XCP as spam filter or so
-
I don't actually want to transfer any XCP though
-
And I don't have any as per the message
-
aaah so I create the empty addr beforehand and then copypaste I was tryna to it through clicking the book icons
-
bought some XCP from a dispenser, but this seems now also rather stuck... probably have to wait a few blocks or so
-
You could try doing a multi send, which might be easier and cheaper depending on how many assets you’re trying to move. It’s available on freewallet.io desktop version.
-
figured it out
and this works with segwit, yes? -
I seem to recall you had some old SoG cards, so make sure to use a decimal point for any divisible assets you might be including in the transaction.
-
Yes, dispensers work fine on segwit addresses... only issue with segwit addresses at this time is MPMA sends
-
So when my BTC tx to the dispenser is confirmed, can I be certain the despensed items will also be confirmed? Or could it be that if a dispenser is set up a long time ago it will not pay enough TX fee.
-
I think dispensers were not around when I regularly did counterparty TXes back in the days. Or alt least not in this form
-
The XCP show up in the balance, but not in the history of the account and sweep function tells me I can not sweep unconfirmed or should use ~unconfirmed tag, which is not a GUI option
-
Dispensers are a single tx.... btc payment and crediting the sending address with tokens are done at the time the dispenser payment transaction is mined in a block and parsed by counterparty.... no second send txs required
-
Dispensers are relatively new feature in last year
-
Make sure your using freewallet.io desktop wallet.... and yes, you can’t move unconfirmed assets, can use unconfirmed btc, but can’t send an asset from your address until it is received by your address.... which only happens when send tx is confirmed
-
OK thanks
-
- 16 April 2021 (46 messages)
-
Is it possible to search assets by description?
-
3058
-
3O58
-
Yes, in Xchain
-
-
I run into the same issue with multi-send as with sweep. It keeps telling my I can't use unconfirmed coins for the TX fee. Block explorer shows no unconfirmed however. Any way to see if there are still TXes in the mempool which would go to this address?
-
XChain shows nothing unconfirmed...
-
Any help appreciated
-
Did your dispenser purchase confirm or do you have any other pending orders? It could also be a tx has initiated, but it isn’t displaying properly in your wallet.
-
There are some things strange for sure... e. g. balances are correct but history seems to not show certain things...
-
Would it maybe help to freshly restore the wallet?
-
It couldn’t hurt to try the classic tech solution of turning it off the back on.
-
Just closing and opening the wallet I have done many times. Also PC reboot already done
-
I recall JDog commenting that the history in freewallet doesn’t always display things properly with some of these newer features. Let me try to find that...
-
Under heavy mempool load, CP mempool does not update as fast as it should.... it USED to delete and rebuild everything from the CP mempool every second... John added some code a while back to adjust the behavior under heavy loads so that CP could get back up and sync quicker (very intensive creating/deleting entire mempool from database every few seconds)...... I too have had some funky behavior where I will see that a tx has been mined, and shows as confirmed on xchain, but will also show up as "unconfirmed" on xchain for a while until the mempool gets updated..... shouldn't stay in there too long, but yep, can confirm.... sometimes txs will go straight to confirmed and skip mempool, or stay in mempool even after confirmed.... its just a display issue which fixes itself after a couple minutes 🙂
-
Well I guess waiting 12 hours should be enough then if this issue usually only persists for a couple of munutes
-
Did you check your address on other block explorers like blockchair or sochain?
-
Yes I see no unconfirmed. 85 confs is the lowest one
-
Capchat
-
The mempool is very full. If you have transactions and they are not showing under unconfirmed, wait it out
-
-
-
I payed 17-20is in fees...
-
-
OK good info
-
-
-
(is there a better tool to check for more potential unconfirmed?)
-
Yesterday mostly... about 44 sats per byte
-
Some still took few hours to confirm
-
-
non of the explorers show any unconfirmed... I think a problem is that my BTC I want to use for the fees is not in one UTXO chunk
-
Many years ago, I still had a little bit of dog coin left in my wallet when I played dogeparty.
-
What’s your wallet address?
-
-
Insane, worth nearly $700,000,000 now
-
-
Automic swaps between doge and btc for assets. All btc assets that get sent to doge get btc infront
-
-
Stop torturing yourself 😂
-
-
-
Loonardo Joe Vinci
Two hours left in the RAREPEPE auction (scarce.city/products/RAREP…) so let's spice it up... Winner will also receive a GOXPEPE floppy disk NFT made by me in early 2019 (these have never been sold, only given to friends) GOXPEPE is the 2nd rare pepe (S1C2) created by @myrarepepe
-
pretty dank lol
-
-
- 17 April 2021 (111 messages)
-
loooool incredible
-
Remember thinking WTF would anyone fund an NFT company years ago. Clearly I was wrong.
-
-
-
-
-
-
-
-
-
-
-
-
The mobile version is not 100%. Although I do like it.
-
-
-
Can sign message, not transaction
-
So it won't broadcast it?
-
-
I set up a dispenser last month and it looks like somebody has purchased my dispenser. But when I dig deep into the transaction it doesn't make any sense. Can someone help?
I put 1000xcp up for .15btc and someone bought it.
But the transaction says I received 1.11 BTC
How can I confirm what exactly happened and how it happened?
https://xchain.io/tx/55b1373a82c91e9afaacef62c8db702f338dbe38e56b33f885da1bd9c60caba9
@jdogresorg -
NILIcoins
First token to be sold on auction april17th 2021 A token holder holds the right to issue one of his twitter’s assets as a subasset from the ITWITTER original issuing address .The order by which ITIWITTER tokens are sold (sent) is the serial number a subasset get once minted.twitter.com/theog__/status…
-
They sent too much? Did you do other transactions at that address
-
Did someone send you 1.1 btc not dispenser related?
-
Yes
-
-
That 1.11 was me sending btc to my address....
Apparently the dispenser received .00461370 btc and dispensed all xcp even though it should have received .15btc to dispense all -
That person bought 1000 xcp with 1.1 btc
-
-
I don't think so, anyway to confirm?
-
The wallet that bought it is huge
-
It has 31,000 btc
-
He has more than 30,000 btc
-
1.1 btc is a drop in the bucket for him
-
-
-
Oh wow
-
Maybe that's what's up, sheet
-
-
-
Maybe I deposited from an exchange to that address and inadvertently executed the xcp dispenser
-
-
-
More proof of burn G
-
😆
-
someone did the same mistake 8 months ago
-
I've got to confirm with the guy who did it it's actually not my wallet but a friend of mine so I've got to confirm when he's up
-
The plot is so exciting, it’s time to make a Hollywood blockbuster
-
-
Shit ok lesson burnt
-
does the exchange have xcp?
-
-
No I think you sold yourself xcp
-
lol xcp to exchange wallet
-
Ya correct
-
-
This is probably just a display issue... unfortunately, CP does not actually save the amount of BTC paid in a dispense transaction... CP only stores the transaction hash... so, xchain has to try to parse in the transaction info and detect the correct BTC amount paid from the outputs using the address....sometimes the displayed BTC amount is incorrect..... checking the actual BTC transaction itself will show you the real deal of what went on... you were not overpaid, xchain just doing bad job of detecting which output is yours...... I have opened up a github issue for us to start storing the btc_paid amount in the actual CP database.... and am working on a new block explorer which actually parses in the exact BTC amount paid, so should be fixed in the new block explorer
-
Store BTC fee paid to dispenser in dispenses table · Issue #1118 · CounterpartyXCP/counterparty-lib
Currently Counterparty does not store the actual amount of BTC paid to a dispenser, and only stores the quantity of the asset dispensed. We should start storing the BTC amount paid to the dispenser...
-
silly that we aren't storing the actual BTC amont paid in the database currently.... will be fixed in future versions of CP 🙂
-
could be... need to setup dispensers on new/unused addresses ... not ones you use everyday.... have yet another update I need to make to freewallet to warn people about setting up dispensers on normal/used addresses.
-
dispenser warning · Issue #50 · jdogresorg/freewallet-desktop
Need to update wallet to check if address that dispenser is being setup on has any asset or BTC history, and if YES, throw a scary message about not setting up dispensers on addresses that you use ...
-
lol sorry for your loss
-
I think people would use this feature more if freewallet would create empty addresses within the dispenser setup dialog
-
you can already setup dispensers in freewallet on empty addresses. Putting up a warning letting users know to not setup dispensers on addressees they normally use is good enough to warn/scare them away from setting up a dispenser on a normal address tehy are using..... and still give them the option to continue setting up the dispenser if they want :)
-
I am not a believer in doing things automatically for users to make it "easy".... warn them, give them guidance, but not a big fan of rails that force actions..... would wind up doing more customer support "I don't know what address my dispenser was setup on, please help, etc".... trying to get out of the customer support game 😛
-
starbucks time 🙂
-
I tried but you need to input a previously generated address, right?
-
you can input ANY unused address, does not have to come from your wallet :)
-
I setup a donation address for CIP24.... then 2 days later John setup a dispenser on that address to vend out tokens when someone makes a donation completely independent... I had no idea he was setting up a dispenser on my address... so you see, you don't have to control the address you set dispensers up on... you can set them up on any address without any balance history 🙂
-
dispensers are prolly a cool tool for guerilla marketing too..... setup a dispenser on an address for someone else, make a big deal out of "If you were making a donation to address ABC123, you now also have a CP token "XCPROCKS" which you can use to do XYZ.... people like free stuff... easy way to get them to check out XCPROCKS and what you can do with it :)
-
</end textwall... begin starbucks retrieval> 🙂
-
Ahhh that makes sense. Was wondering how John miscalculated the give amount for the CIP and was on your address.
-
-
Yea that’s cool. Didn’t realize this.
-
nope... even tho John and I were friends, we kept business separate and played by the rules... I am the only one who has access to the CIP funds/donations/addresses.... John would only get the funds after dev was finished on the CIPS.
-
Same. Waiting on 2 transactions to get mined so I can buy some wax :-/
-
Did a $10 tx fee Bitcoin send yesterday and still hasn’t confirmed either
-
-
BCH up 50% will cause hash power to shift around some too
-
I did one with 1000sat and another with 3000 sat :-/
-
-
-
-
yup... big drop in hashrate... so, gonna be a clogged up mempool for a while... blocks only being found every 30 minutes or so instead of every 10
-
-
-
-
-
-
-
-
-
-
dex-trade is working on setting up a fednode... they said they had an issue.. I spent yesterday standing up a new server and syncing a new CP node and verifying indeed we have an issue (config file issue with counterparty not talking to addrindexrs).... I have just pushed a fix to master... and doing some additional testing, then will pass the fix on to them.... https://github.com/CounterpartyXCP/federatednode/commit/19cc8c62745dbd37c115d4b035c884e85384d03aconfig file fix · CounterpartyXCP/federatednode@19cc8c6
- fix to get counterparty talking to addrindexrs again
-
TLDR... withdraws from dex-trade should be working next week fine
-
They have that now, i was able to withdraw
Just the process after withdrawing is also annoying, turns out -
ah... got ya 🙂
-
-
well... if we get the probit listing funded, should be a smoother experience I think 🙂
-
As soon as a trx doesn't cost me an arm and a leg
-
Yeah... same thing over at zaif.. .their withdraw requests are manually processed and can sometimes take over a week to get processed
-
Good grief
-
its a pain... but, we all know where this is heading.... decentralized exchanges.... 🙂
-
-
-
for now, gotta play ball with the centralized exchanges to get the liquidity we need for XCP... until we get some better/cheaper/faster decentralized exchange options
-
-
-
FYI... just put out a new version (0.9.18) of freewallet-desktop which has the above warning message to users who are trying to setup dispensers. 🙂
-
-
Yes... have been able to for a few months now 🙂
-
- 18 April 2021 (12 messages)
-
you should almost have a totaly differnt passphrase - wallet for dispensers
-
to totaly elemnate any chance of fuck up
-
Anyone else not seeing CP tx on xchain?
-
Nope, mempool has xchain rekt. I see some completed transactions from the last 24 hours, but nothing in the unconfirmed less than 2 days old.
-
Xchain somehow rekt my screen time last week.
-
-
looool
-
take a break!
-
Memes made him do it
-
-
That’s crazy
-
Good to see the mempool seems to have topped out around 112k pending tx's and is currently down to 105.8k.
Median fee is still rising though, currently $22.79. Trading Counterparty collectibles is not for the impoverished under these conditions. - 19 April 2021 (28 messages)
-
have people noticed this yet https://www.coinbase.com/price/counterparty
-
-
-
-
what's their source of their news?
-
-
-
maybe simply by triggering news scraping bots, one could generate interest
-
Back to 187,000
-
Error while trying to broadcast transaction. Please try again.
-
cant generate transactions today
-
@jdogresorg
-
No technical issues.... prolly related to low fee pending tx and busy mempool
-
Thanks
-
-
-
-
dex-trade is working on setting up a fednode... they said they had an issue.. I spent yesterday standing up a new server and syncing a new CP node and verifying indeed we have an issue (config file issue with counterparty not talking to addrindexrs).... I have just pushed a fix to master... and doing some additional testing, then will pass the fix on to them.... https://github.com/CounterpartyXCP/federatednode/commit/19cc8c62745dbd37c115d4b035c884e85384d03aconfig file fix · CounterpartyXCP/federatednode@19cc8c6
- fix to get counterparty talking to addrindexrs again
-
Same answer I gave yesterday.... please wait at least 2-3 days before more dex-trade rants😜
-
oh man sorry
they enabled the withdrawal on saturday and told me it would be sent the same day -
-
-
I think it’ll be working soon.... the mempool being rekt doesn’t help either😢
-
-
-
-
I believe there was talk in here a while ago about trying to get xcp listed on coinbase. I don't think they have yet. I think this is just a price tracker.
-
Interesting. I've been talking with harmony about them sponsoring a new wallet.
- 20 April 2021 (143 messages)
-
it is a just price tracker, been there long time with all 1k+ other coins
-
Nice, one of these cash flush projects is going to see xcp as an opportunity eventually.
-
Saw it a while ago too. Nice to see.
-
-
-
The ceo of harmony loves CP
-
-
-
-
-
-
Cornholio, have you been sleeping better with this 200k mempool
-
my totally overpaid trxs from three days ago finally went through wheee
-
Card looks good! Can I have one and/or a drinktoken.mellowcorn? Not sure I'll be in the bay area anytime soon, but it'll motivate me to drop by if I ever am.
-
I had a migraine yesterday, slept like a baby from 8pm to 6:30am
-
Only a few more days to collect the Probit listing fee guys... and we aren't even 1/3 of the way there with the fund raising.... If you want to see Counterparty (XCP) continue to rise and gain more users and see the price increase, as well as get better listing options for PEPECASH and other projects on the platform, we need to continue with better a exchange listing.... You guys asked for exchanges for years.... Here is your chance to contribute to getting Counterparty on a Tier-2 exchange... I am down to work for what the community wants, but I am wasting my time and effort working with exchanges if we are not able to raise funds for exchange listing..... Hoping this exchange listing gets fully funded in the next few days.... Lets keep the upward trajectory going. 😀🚀
-
-
-
sadly buying one you alread spend the same on fees.
-
If we fail to enter probit, will you return the btc to us?
-
i'll just give you 15 000 bitrock
-
It seems that we are all wasting time and energy.
-
We’re the alpha chain. High fees are an honor 😆
-
How so?
-
So I bought another 5
-
-
You'll wait another two weeks to get the XCP out