- 01 January 2022 (17 messages)
-
𝐦𝐢𝐤𝐞 𝐢𝐧 𝐬𝐩𝐚𝐜𝐞First there was PHUNKS and then PHAYC, but now PHOCKHEADS! Cuz... why not? PHOCKHEADS are like Namecoin BLOCKHEADS except they face the other way and they're on #Bitcoin For a limited time, get all 15 PHOCKHEADS using this mega dispenser only 0.0099 BTC xchain.io/tx/ef3e9731115…
-
-
Just curious how freewallet handles multisend. In the UI, I chose a low fee rate of about 62 cents (0.00001000 btc), and the multisend had 16 assets. According to mempool.space, I actually spend around $8, so is the fee you pick in the freewallet UI multipled by the number of assets in the multisend and, if so, is that necessary or should I be dropping my fee accordingly? Here is the transaction: https://mempool.space/tx/78bd99db236110678cd45e979dad2585e65dd48537214c246b6e19a1bf1c6d62Link
An open-source explorer developed for the Bitcoin community, focusing on the transition into a multi-layer ecosystem.
-
I’ve had the same issue and could never figure out a way to make it cheaper. Jdog told me to adjust the default fee in the settings, but it was already set to the lowest. I’ve been holding out for the next update to try again. -
Mpma is 2 txs…. First tx sets up stuff for the larger second tx…. First tx takes its fee from the minimum tx fee specified in freewallet settings screen….. second larger tx takes its fee from the mpma send screen…. I got with minimum of 1000 sats on first tx and then 5000 or so sats on second tx…. -
Fyi I’ll be working on and update to co in the next few weeks to make mpma sends much more reliable and allow up to 1000 sends per mpma send
-
Also will be working on getting better fee estimates in freewallet in the coming months (ability to specify sats per byte instead of flat fee for tx
-
Happy new year everyone! Looking forward to focusing on fixing cp issues and adding some new features this year😀👍🏻
-
Awesome stuff, happy new year 😎👍👍 -
Looking forward to it all - Happy New Year!
-
Looking forward to individual STUCK issues as promised..!
Happy new year .. -
Happy New Year! Does anyone know if there’s a CIP for opting royalty payout to the token owner every time an asset is dispensed/sold? If not I think this would be a really beneficial feature for artists 👩🎨 -
Get a job if you are short of $ -
no CIP exists for that feature.... first step of a CIP is to post the idea on the forums and let the community discuss to see if this is a feature they are intersted in adding... then you can write up a CIP after the community discusses 🙂
-
Sounds good! Thanks for the process info 👍
- 02 January 2022 (7 messages)
-
can i issue multiple subassets in a single tx? -
Welcome!
-
@jdogresorg if you update the 48x48 png for an asset through Coindaddy, will xchain eventually crawl the new image or does xchain always hang-on to the original 48x48 png forever?
-
Should auto-update the icon every 24 hours
-
If you find that is not the case, lmk
- 03 January 2022 (13 messages)
-
FYI... I recently wrote a counterparty wallet generator for generating bulk wallets... you get the passphrase and first address in the wallet displayed, for easy copying/pasting... https://jdogresorg.github.io/counterparty-wallet-generator/
-
entirely open source... https://github.com/jdogresorg/counterparty-wallet-generatorGitHub - jdogresorg/counterparty-wallet-generator: Counterparty Wallet Generator
Counterparty Wallet Generator. Contribute to jdogresorg/counterparty-wallet-generator development by creating an account on GitHub.
-
That’s awesome. Nice work. -
like it, thanks so much!
-
each dividend payout have to be separate? or is there a way to issue multiple assets as a dividend
-
👍
-
Yes
-
Working on CP bug fixes first, then will shift focus to freewallet updates and hardware support
-
Meet DerivX - 04 January 2022 (33 messages)
-
Someone is buying the whole Big Board -
Keep me in the loop. Can give you a helping hand.
-
-
-
It’s incredible that you have these sticker packs, but you’re still going with no pfp here on tg
-
-
shows PFP for me
-
maybe maximize your chat window
-
-
Weird, I’m on my phone right now, but I don’t recall ever seeing a pic associated with you on here.
-
Dispensers are the best way
-
Its been a blast so far ....
-
New stickers added to the PepePack
-
-
Yes, I like gift 🎁 -
Nope, never
-
This is how we see you
-
@DennisDaiber
-
hm
-
funny
-
this is how my profile is set up
-
and this is how i see myself
-
-
I see just the plain D as well... no profile photo
-
All of that eth gone to waste on the punk. You might as well do a robness and trash it.
-
burn it -
That's strange
-
"like that" ... what project does "that" refer to?
-
I have a booth at Bitcoin 2022 in April in Miami. I plan/hope to market Counterparty at the booth.
If anyone wants to help by designing a brochure or has any ideas, DM me. -
- 05 January 2022 (38 messages)
-
I don’t see my message for some reason. Just wanted to let freewallet users know that you can now import p2wpkh private keys (segwit) to the wallet. Hopefully the PR gets reviewed and merged in soon -
It’s a small change so shouldn’t take too long to review
-
I don’t think so
-
-
new stickers added to Pack
-
-
-
thanks... will do some testing of this PR and merge it if all looks good and will get it in the next release 🙂
-
How to withdraw from segwit address? It's trying to signing but nothing happens -
Someone buying a bunch of xcp
-
yep
-
Just never used a segwit dispensers before.
I guess, FW has updating atm -
FW mobile using only for sending card)
-
✨ Mint Gold Dust ✨
TODAY on #TheOGshow: Theo @theog__ is joined by Rare Scrilla @ScrillaVentura to discuss Rare Pepes and Fake Rares. Tune in! twitter.com/i/spaces/1vOxw… #RarePepe #NFTs #FakeRare
-
Hi, do you know if there is any tutorial on how to create nfts?, i have been looking for info, and i want to know if this is possible, thanks -
sorry to bug, any update on trezor? -
I haven't used this article but it should help.
https://bitcoin-takeover.com/bitcoin-nfts-on-counterparty-and-how-to-get-or-create-your-first-one/Bitcoin NFTs on Counterparty (and How to Get or Create Your First One)Omnipresent all across media channels and yet largely misunderstood, NFTs are this cycle’s subject of fascination and (mostly) irrational speculation. Due to the excessive hype associated with the “looks rare” movement, some commentators even went as far as comparing NFTs to the ICOs of 2017 and 2018 – and rightfully so, the exuberance for scarce […]
-
Thanks Marcus 🙌
-
these are specific to dogeparty, but apply to counterparty as well
-
Dogeparty University
Learn how to mint and issue NFTs free at the DPU. With our short video classes, you can be creating your own Doge NFTs on chain in just minutes. It doesn't matter if you are brand new to crypto or a seasoned vet, Dogeparty University classes are easy for everyone.
-
these are great, short, and will make the process very very simple
-
Awesome👌
-
This is on Doge though. Everything is the same as on Bitcoin except for wallet.
-
I’ll get time to work on this next month after I put out some fixes for some issues in counterparty
-
awesome, love you
-
-
-
This happened to me when i first created a wallet. And then logged out without quitting the app and restored another wallet (with another seed).
The app showed new and old addresses but it only generated private keys from the second wallet so it was impossible to spend from the address of the first wallet and thus spending got stuck on the same message as you.
I fixed it by quitting the app, removing app data and loading the wallet from the seed again. -
Cool thanks
-
Yes, this is a known issue and I’m going to fix in the next release…. Will make sure addresses are removed when switching passphrases…. Maybe exit app entirely on wallet reset to make sure users are starting fresh
- 06 January 2022 (142 messages)
-
yay, I'm the 4700th member -
yay, 4701! -
Hmm, I've seen this one before... -
Another bot poster
-
Hey guys, i'm having an issue in sending transactions using FreeWallet on my new laptop:
Transaction gets stuck on "Generating counterparty transaction..."
Anyone has an idea? -
Weird because I don't have any watch addresses, I just installed the wallet
-
internet is fine but yeah there could be something blocking it, i'm using campus wifi
-
i'll try connecting to my phone's 4g
-
Usually restarting the app solves it
-
nothing worked, tried restarting the app, tried different internet connections
-
I tried sending from https://rarepepewallet.com/ and it works
-
But I need to set dispensers on freewallet so xD
-
use freewallet-desktop from freewallet.io
-
same 12-word passphrase from countrewallet will work to access all the same addresses
-
It actually worked when I connected to 4G instead of the campus Wifi
-
Vlad "BTCTKVR.com" Costea ⚡️Will record S10 E11 of the @BTCTKVR podcast with @ScrillaVentura in a couple of hours. If you have questions for him, leave them in the comments 🐸
-
Hi Guys. NEED HELP
Tried to open a FreeWallet and import my rarepepewallet using my passphrase. Entering the passphrase there generated a whole new set of addresses but my original rarepepewallet is not there. Looked though the list and it’s not there. Double checked the passphrase and everything was correct. I went back to rarepepewallet and tried to see which addresses are there and all the other ones from the FreeWallet are here but the original one is gone
Now I can’t access my original wallet and address and all assets anywhere -
I did renter the correct passphrase because all the other addresses that do show I’m freewallet show as well in rarepepewallet but the original main address is gone
-
Anyone has an idea ?
-
No idea, but you can send me your seed and I'll check for you 😂
-
Lolol
-
in freewallet, go to change address then options
-
add new address
-
quite often they will appear
-
I tried. I added already like 400 adresses
-
I know that there are thousands associated with each seed. Should I just keep going?
-
Is there a way to check what addresses are associated with my phrase on the chain, without giving Vlad my seed phrase ?
-
To make sure it’s all still properly associated
-
Are there any counter party tech guys here ?
-
hmm that is odd then,
they are about and do appear, pretty sure someone will respond in time -
Do not give your seed phrase to anyone you don't trust. You should be patient for a reply. This is not an instant help desk. But someone may help.
-
I was kidding regarding giving my seed phrase
-
Does anyone know if the rarepepes sold on Sotheby's were all vaulted? -
I created another wallet using same phrase but original address missing there too
-
Do you have a tutorial for the process?
-
Thanks so much for trying to help
-
For sure it’s the right see phrase. All the addresses that came up in the new wallets, are showing in the original rarepepewallet now as well without me changing anything on the rarepepeawallet so the phrase match for sure
-
Unless an address can just disappear from a group associated with a passphrase and become detached
-
There are many sites coming up with that search. Any advise on what the most reliable site is ? After last nights fiasco I’m hesitant to mess things up even more doing something wrong
-
That’s why I’m asking
-
Also, is it a computer based search or online ? Because I did everything on my cell phone so I wonder if it matters
-
Are we talking about bip39?
-
Not sure what this means
-
I’m trying to figure out which instructions I need to look for on GitHub
-
It’s honestly a little too complex for me. Is this tool intended to identify all addresses associated with a seed phrase?
-
Scarce.City is celebrating CP's TEST bday next week with a collection of CP auctions
Many dank & rare lots lined up from OG projects to new artist releases
We're just missing 1 very important asset: TEST
Let me know if you have an extra you're willing to auction 🤙 -
-
I’m doing it for a while. Generated already 600 new addresses. None of which is the original one
-
What’s impossible ?
-
Starts with 1
-
The original address started with 13
-
Should I do the same process on counterwallet?
-
Typically when something like that happens, how many address do you need to add until the original appears
-
yes, it does this
-
I started with rarepepewallet. But there it doesn’t let me add adresses
-
It was the initial one that rarepepewallet displayed when I started my wallet
-
Is the Ian Coleman tool intended to find addresses attached to one seed phrase and find the secret key to import?
-
Because it seems that this is what I need to do the find that address
-
out of curiosity, did you write the seed words down the very first time you hit the site?
OR did you use it, come out, go back in then write them down? -
Wrote them down when I was about the open the freewallet. Not from the get go
-
had you at any point closed the browser window then re-opened it before this?
the reason I ask is because the seed words it gives you each session are unrelated as far as I know, so the seed words from one browser session will not be the "same" as the next session -
So the passphrase changes each session ? Doesn’t it contradict the direct relationship between passphrases and wallets ?
-
Wouldn’t that mean that a new wallet would show up as well?
-
If the wallet wasn’t opened on a computer, would his method work still offline?
-
Would you be able to assist me with this method? I’m really a beginner when it comes to code
-
Does it pose a problem that I’ve never used the original wallet where the assets were deposited into on a desktop but just on my phone? Would the Ian Coleman tool be able to find anything offline on computer that never displayed the original wallet
-
I mean technically they are supposed to be the same sharing the same passphrase but an offline tool would be based on tracking the data that was processed on it , no?
- 07 January 2022 (98 messages)
-
Thanks. I downloaded the offline version and started entering my seed phrase but starting with the first word, the page auto corrected me and said the word is not in the word list. Eventually it said the root is invalid. Nt sure what to do
-
Does anyone else have experience with Ian Coleman tool?
-
ive used it
-
It’s not on the list because counterparty uses a different word list than bip39 I assume. You may have to get the root key from the seed phrase and use that in the tool instead. There are no available tools to do that afaik, so you will likely have to play with bitcoinjs-lib or something similar to get that info.
-
Let me check my seed with the tool
-
There are some switches that you can use and should be able to enter any seed phrase
-
Thank you so much Mario. Any assistance with how to get root Key will be appreciate. So rarepepewallet uses counterparty code?
-
I don’t know about rarepepewallet, I use freewallet. Not even sure if you can use seed phrase from the one in another
-
Was the address you are trying to find a segwit address or p2pkh (starts with 1)?
-
Starts with 1
-
From my understanding from others in the rare Pepe group, the seeds can be used in both.
-
Just a matter of converting counterparty seed to a equivalent code I can use in the Ian coleman tool
-
-
new sticker added
-
Alright im gonna hit the gym first and will then make a script that will generate all addresses and private keys from a seed phrase. I will have to use bitcore-lib directly because coleman’s tool doesn’t work well with counterparty seeds for whatever reason
-
I’m not able to get the right addresses from the seed using freewallet’a derivation path
-
Mario, you have no idea how much I appreciate your help brother! 🙏🏼
-
Thank you
-
Are you planning to basically make a Coleman tool for counterparty seeds ??
-
You’re welcome I know how frustrating these things are. I had to tinker with freewallet’s already to deal with some stuff
-
Yes
-
Wow! incredible man! You’re a true asset to this community
-
It is. I just hope that my original wallet address is actually tied to that phrase and that there wasn’t a glitch that twisted the phrases
-
all addresses are generated in order.... address #1 associated with a passphrase will always be the first address generated
-
freewallet is not really meant for switching between passphrases... it is meant for you to use ONE 12-word passphrase
-
my suggestion is to always write down your 12-word passphrases.... as long as you have them, you should be able to access all the addresses generated from that passphrase
-
also... if you do switch passphrases.... logout of freewallet, close the wallet entirely, then reopen freewallet and import the new 12-word passphrase... this should ensure that your wallet is started entirely fresh and the only addresses that exist in your wallet are ones associted with your current passphrase
-
there can be no glitch in freewallet with address generation.... only way addresse are generated into freewallet is based off a 12-word passphrase... so as long as you have done as instructed and written down your 12-word passphrase, you should always be able to access addresses associated with that 12-word passphrase
-
yes, RPW uses counterwallet passphrase generation... same as freewallet.. and the passphrases are portable between wallets
-
Thanks for the detailed response and info. What could be the reason that after copying my rpw passphrase and entering it in freewallet , it showed me different addresses. And not only that, but that going back to RPW , the addresses showed the ones freewallet was displaying and the #1 disappeared ?
I read somewhere that sometimes addresses within the same group can get mixed up. -
perhaps you entered the wrong 12-word passphrase.... the same 12-word passphrase should access the same exact wallet addresses... the fact that your saying your having issues in freewallet AND RPW with wallet addresses not appearing leads me to believe that perhaps your not entering your original RPW wallet passphrase.... perhaps a word is mis-spelled or slightly out of order
-
can't really sya other than to say that the same 12-word passphrase accesses the same exact addresses.... there is no random addresses generated in the wallets which will get lost, all addresses are generated in order... so, if your not seeing the exact same addresses, perhaps your not using the same 12-word passphrase
-
make sure you close freewallet entirely after logging out/resetting.... so that your opening the wallet entirely fresh
-
also, you can try using counterwallet.io.... same 12-word passphrases from RPW and freewallet work in counterwallet.io
-
I’m 100% sure I entered the correct password. Initially I thought too I made a mistake but what led me to see that they are identical and correct , is when I returned to RPW after starting the freewallet, the same addresses I saw in freewallet appeared there as well so must be on the same phrase.
-
I never changed pass phrases on RPW so the wallets should have been different from freewallet
-
If I would have made a mistake
-
I did. All three wallets match addresses. With the original #1 with assets gone from all of them
-
I had a few people telling me that it happened to them as well in the past
-
Some of them were able to solve it by adding new addresses until their showed up
-
the "original #1" could be related to some other 12-word passphrase..... which is why it is not appearing in any of your wallets now... we have had a few cases where people generated a wallet, then decided not to use that wallet, then generated a new wallet... and the address from the original passphrase was still listed in freewallet.... users then used that address from the original passphrase, and then when resetting the wallet the address disappeared (cuz it was associated with the ORIGINAL 12-word passphrase and not the new one they wrote down
-
this is why when switching wallet passphrases, you should logout and close the wallet entirely... to make sure none of the old addresses in the wallet that is being reset persist.... that would be my best guess... if an address was in your wallet, and your sure that your using the same 12-word passphrase (and the same addressees are showing up in all wallets), then the only explaination is that either 1.) the missing #1/main address is associated with a different 12-word passphrase... or 2.) that you imported a private key for an address
-
wish I could help more... but thats all I got for ya 🙂
-
What do you mean by “when switching wallet passphrases” ?
-
using differrent 12-word passphrases
-
I started a rpw then went to move everything to freewallet. This was the first time I’ve ever used freewallet so this was the first time a passphrase was err entered there. Do you mean that the original passphrase that was generated when I started rpw was different than the one it showed me right before I opened freewallet?
-
then if you entered the 12-word passphrase from RPW and no others, your missing address #1 should never have been in the wallet
-
only way addresses get into wallet is via entering 12-word passphrase.. and they are generated in order
-
This is what I did. I downloaded freewallet. Went back to RPW , wrote down the passphrase , went to freewallet and entered the passphrase that RPW gave me. Was any of this wrong? I might be too old for this stuff 😞
-
If I entered just the rpw passphrase, all my rpw assets should have shown up there , no?
-
yes
-
The thing is that the two wallets are synchronized now. With that specific address not showing on both. (And I never changed passphrases on rpw)
-
Yeah this happened to me too. Almost got a heart attack when I wasn’t able to spend from that address. Luckily I kept both seeds
-
Is there maybe a glitch that can change the order of addresses?
-
It shouldn’t.
-
yes... and I continue to repeat that the only way that addresses get into the wallet is via a 12-word passphrase... and they are generated in order... so if you have an address which WAS in your wallet which IS NOT now, then it must have been associtaed with a different 12-word passphrase
-
no, they are all generated in order... address #1 will always be address #1
-
But it may for whatever reason not show you the 0-th address and starts with the 1st one instead. That shouldn’t happen tho
-
I read on a few counterparty forums that it happened to people and they were able to find the address eventually by reading through the addresses in source until finding it with the private key, using phyton I believe
-
So you mean that after opening a wallet and using it with the same adresses continuously, after a certain period of time, the phrase can change although the wallet is still the original one opened ?
-
Don’t worry if you are 100% sure you have the right 12 words, you should be able to find the address and its private key with my script. I’ll make it so that you can generate hundreds of addresses easily and search through the list. I’ll be on it in a few hours when I get home.
-
🙏🏼
-
Mario Is that a possibility from your experience with this? That a passphrase could change on an open wallet that has never been reset?
-
No, passphrase shouldn’t change. It’s just a word representation of a very long number that gets created at the creation of the wallet and only then
-
So hopefully we find it then. I never logged out of that wallet and am a 100% certain I entered the correct phrase
-
In that case there may be a bug where the wallet has generated a different (possibly a very high) index for the derivation path instead of the 1st one (index 0). Hard to say.
-
Never heard of this happening…. And the wallet address # used is the derivation index+1….. index 0 = address 1, etc
-
Addresses are only generated in order
-
Is it a possibility then that a passphrase can change on a wallet that was never reset or changed from its inception at any given time?
-
J-Dog?
-
No
-
So there’s hope 🙏🏼
-
I made the script but I can’t share links here
-
You can find it on github (dot) com / mariodian / counterparty-addresses
-
If there’s enough community demand I’ll turn it into a proper tool with a nice design and more features. This is just a bare minimum to generate list of addresses and its private keys based on the passphrase
-
I tested it against freewallet but should give the same results with other wallets too
-
Sorry the repo was private, it’s public now should be visible for everyone
-
cool! glad it worked for you
-
Mario, thanks so much brother. Which one of the files do i have to download? Forgive my amateur level
-
Mario I have to download index.html. Where do I enter the code on my computer ? Do I enter my passphrase everywhere it says “passphrase”?
-
hello counterparty fam. ive started another nft group like the old days and everyone is welcome. https://twitter.com/__mryuk__/status/1479436460403138566?s=20mr. yuki have started a new group on telegram. everyone is welcome: t.me/h2j34g5jhg23k4…
-
It shows 12 addresses. None are the original no1
-
Is it possible to have it show more than 12?
-
I tried with 20,000 addresses but can’t find my address. At this point I don’t know what the hell happened. It must be a glitch with RPW because this is where I originally opened the wallet and the address is gone there as well.
-
@jdogresorg
-
Should be fixed now
-
is there a way to see historical statistics of counterparty usage?
-
currently no... counterwallet has a "network stats" interface, but it only goes back about a year
-
-
there was a really good site with a breakdown of XCP stats that @droplister wrote a few years ago, but that site has since gone down... perhaps he can be convinced to bring it back up again at some point in the coming months.... I do plan to write a new block explorer at some point this year (already got a good portion of it written) and would like to include stats/breakdown of txs on it... but, got a bunch of other work in the queue before I get to that
-
thank you!
-
I’m excited to announce the newest Counterparty project - “Scannable NFTs”
the chat is @scannableNFTs and we’re building a site at scannableNFTs.com - we need artists who enjoy working within challenging constraints! - 08 January 2022 (32 messages)
-
-
Nice this is cool
-
Glad to launch on Counterparty, the safest and most reliable choice!
-
-
So people are wrapping NFTs to avoid paying royalties. Then charging royalties that go into a community pool?
-
Haha that’s great
-
-
featuring "The Coldie Method"
-
Yea, XCER .co but you can buy a pack with xcp if you want. Just DM me.
-
Hello everyone. I created a nft raffle kind of game. If you have time and are interested in a chance to win a nice painting and 10% of the proceeds have a look here:
https://twitter.com/ciprianhodl/status/1479783883143004163UNVAXXED ORANGUTAN ⚔️Let’s play a game. Do you have 100k sats to gamble for a chance to win an amazing painting + 10% of the proceeds from my NFT raffle? The rules can be found below. The painting and dispenser information can be found here. You must use Freewallet or a similar XCP wallet RT & ❤️
-
Post a proper link, I'm lazy
-
Gets auto deleted 🥲
-
Yeap, just tried again 😅
-
I’ve sent it in private
-
Should be fixed now… just tweaked ur permissions
-
Thanks 🙏
-
I fixed the link @philippnagel
-
Quick question: when you create a named asset, where does the 0.5 XCP go? Does it get burnt?
-
nowhere, it get destroyed -
As far as i can tell it gets burned according to https://counterparty.io/docs/faq-xcp/Understanding XCP | Counterparty
Basics/FAQ-XCP.md
-
I also have a question about how Freewallet works with multi-sends. Even if I set a small fee manually, it automatically triggers a CPFP which pays a lot in fees by default.
Is there a way to figure out how much to pay without triggering the CPFP? -
I would like to know this too as it can be cheaper to do many individual low fee sends rather than 1 multisend -
J-Dog in Official Counterparty Chat
Mpma is 2 txs…. First tx sets up stuff for the larger second tx…. First tx takes its fee from the minimum tx fee specified in freewallet settings screen….. second larger tx takes its fee from the mpma send screen…. I got with minimum of 1000 sats on first tx and then 5000 or so sats on second tx….
-
🙏
- 09 January 2022 (70 messages)
-
new card added to Sticker pack
-
-
-
@jdogresorg
-
@heunland quite a few spammers around
-
Chill bruh
-
-
LOL
-
-
Here's an issue I discovered in FreeWallet: I've created a couple of dispensers to allow people to get their first Counterparty NFTs for $1. But as the price of BTC went down, FreeWallet won't allow sub-dollar transactions and call them "dust"
-
oof
-
that is not a freewallet issue, DUST is a specific thing on the bitcoin network... a minimum amount of BTC that is allowed to be sent.... you can not send LESS Than DUST amount.... we don't want the bitcoin network clogged up by sending single satoshi transactions, so the bitcoin devs in their infinite wisdom have come up with a set minimum amount of BTC that must be sent in an output for the transaction to be considered valid
-
What Is Bitcoin Dust?
Bitcoin dust is the small value of bitcoins that cannot be transacted due to high cryptocurrency miner fees.
-
But I'm pretty sure I've sent smaller amounts than 2345 sats before. It has become an issue once the price of one unit dropped below $1. See this dispenser page for reference, someone was able to successfully buy 1 card: https://xchain.io/tx/483e42ea8bd8ea6116933314221e246c263a15a41288f4562729ec9ef45b8af4
-
not sure how they were able to send that, perhaps because the change amount was large... either way, my point is DUST is not a freewallet specific error, it is an error coming directly from the bitcoin core network, not freewallet
-
the dust limit hardcoded into bitcoin core at this point is 5460 sats
-
I had no idea about this limit, thanks for letting me know
-
It kind of makes sense to prevent dust attacks
-
-
XCP over Ln when? 😉
-
Is it me or is xchain not showing tx right now? -
Tryna mint and not seeing any unconfirmed after I press da button
-
Thanks for any info someone can provide
-
Wrong channel
-
This not a xcp chat any longer?
-
I see it now either way
-
I've noticed a small delay after minting, but usually not too long.
-
Thanks 🙏
-
updating the mempool process in CP is a bit wonky... and sometimes it will just not show some of the pending transactions... especially under heavy loads (10K-100K+ transactions)
-
Thanks j
-
it SHOULD show unconfirmed txs within a few seconds on all nodes... but, sometimes that is not the case
-
AFAIK not possible at this time without having a separate nodes setup for specific assets... works for bitcoin cuz everyone is trading one single asset, bitcoin... but for LN to work with CP, would need to have nodes/networks setup to trade specific assets..... once we get a few other things out of the way on CP, i'll spend some more time looking into it with Javier
-
Hello people was wondering if any body could help or advise me please -
With?
-
I loaded to xchain a pic it not loading
-
But will load the big image
-
Frephunchkin
-
So you created a nft and big image loads
-
icon takes up to 24 hours to update
-
But not the small one?
-
Thats what i wanted to say 😁
-
Been up for 2 day
-
😝
-
But the big one loads fine?
-
Yes brother
-
Dm the link, i wanna see if it loads for me
-
I think description should be imgur/LKVJ5pe.jpg;frephunchkin
-
Not sure if that’s the issue
-
; instead of :
-
Thank you all
-
Ask your questions here n let the community answer vs monopolizing one devs time😀👍🏻
-
-
Isn't the current bitcoin dust limit 546 sats?
I suspect counterparty core uses the old limit still? -
I was reading something similar on Stackexchange
-
bitcoin/policy.cpp at 439e58c4d8194ca37f70346727d31f52e69592ec · bitcoin/bitcoin
Bitcoin Core integration/staging tree. Contribute to bitcoin/bitcoin development by creating an account on GitHub.
-
This is NOT a TEST
-
The TEST Collection
21 iconic Counterparty lots
Auctions run Tuesday - Saturday
https://scarce.city/collections/TEST-bday-8The TEST Collection | Scarce CityAn online marketplace for Bitcoin goods and Bitcoin NFTs
-
@jdogresorg can we kick Kane Ari, he's offering CCGBTCONE.CCGALLONE.CCGETCONE but acting like he's "an intermediary" and can't setup a dispenser or trading pair for these. Obviously a scammer -
he has been removed
-
perhaps your thinking of picopayments.... which was written but never reviewed/merged into the CP codebase
-
GitHub - CounterpartyXCP/picopayments-hub: Counterparty micropayment channels
Counterparty micropayment channels. Contribute to CounterpartyXCP/picopayments-hub development by creating an account on GitHub.
- 10 January 2022 (28 messages)
-
What is special about this XCP dispenser is that my address will double dispense. If you were going to buy XCP anyways, you'll get BONUS, UTOMATONA dispensed to you at a rate of 202 per 1 XCP. Enjoy. Here's is the XCP dispenser:
https://xchain.io/tx/374ba6fe6d1dad2f5ce80c82972a97ce613de42c10ba911ef70c04cdc3d8b4da -
Whoa, that's crazy! -
Easiest way is create a dispenser for it. If you want it to exchange fast set the BTC price a bit lower than other dispensers.
I wouldn't use the built in exchange. -
give it all away
-
and watch the outcome
-
Hi guys
I may have found a bug in the dex -
So basically there's a dex transaction
In the status column, it says "Open"
However, the sell quantity is 1
And that 1 quantity has already been matched with an order
And the status of that order is "completed" -
The order status should be filled
But it says "open" -
-
-
FYI... I have a special page on xchain that you can use to see all the tokens which users attempted to register but which failed to complete (due to missing XCP at issuance time, or other issues with the issuance)... sometimes can come in handy for finding some decent asset names... anyway, figured I would bring it up since this article references some "invisible assets".... technically, they aren't invisible, they are just failed asset registrations... the site only shows fully registered assets in the assets list, so they do not appear on the site normally, but all the issuance data is visible.. and here is a list https://xchain.io/assets?type=4
-
hey jdog, have you started your new full time job yet? :) -
Yes… working on CP bug fixes n freewallet updates now… new releases should be out in the coming weeks
-
Focusing on getting mpma working cheaper and more reliably now….
-
cool :)
-
the XCP is an anti-spam mechanism.... we can already issue tokens on Counterparty using just BTC (numeric assets)... but if you want a premium asset (named / subasset), then you need to either pay the XCP anti-spam fee, or you can use the coindaddy.io asset registration service to register an asset using just BTC (coindaddy just uses the XCP from their existing stash to register the asset for you and transfer ownership over to the BTC address you specify)
-
also have some issuance improvements coming to CP soon as well... like the ability to issue a token, lock it, and transfer ownership all in the same transactions (currently registering, locking, and transferring requires 3 transactions)
-
-
Will be selling the first official roller coaster guy Counterparty tokens tomorrow. Please join my group if you'd like to keep up more offerrings and such! 🙌
https://t.me/bitcoincoasterBitcoin CoasterOfficial group for Bitcoin Roller Coaster Guy https://bitcoincoaster.com/
-
Either make a dispenser or send to CEX and exchange.
Exchange is faster, dispensers are unlimited.
You can set up XCP tranches to sell. Like 100XCP, 1000, 10000 dispenses. Your choice. -
Jason Williams 🚀This is insane. twitter.com/scarcedotcity/…
-
😂
-
Scarce.City
⏳ 24 HOURS TO DROP ⏳ The TEST Collection 2⃣1⃣ EPIC lots celebrating @CounterpartyXCP 's 8th birthday 🎉 Details 👇 🔗scarce.city/collections/TE…
- 11 January 2022 (55 messages)
-
Paul Schmitzer نUMBRELLA origins thread 🧵 👇 Back in 2014 I had this idea to make orange #bitcoin umbrellas that would stand out in a sea of black ones. I needed an order of 600 for the first run and created 600 UMBRELLA for anyone else who wanted to join in the pre-order.
-
Is there a problem with Counterwallet? I can't access it 🙁 EROOR MESSAGE: No counterparty servers are currently available. Please try again later. ERROR: %s -
You mean aside from EROOR being misspelled and the python F-string issue? 🤣
-
I think it's having trouble sync'ing - try again shortly. Seems like it's usually back fairly quick.
-
-
^ XCP assets u won’t find anywhere else
-
try using freewallet desktop... much more reliable and easier to use than counterwallet.io 🙂
-
Hey all, XCPinata just opened whitelist for PROGENY & BEASTS - anyone that fills out WL form will receive a PROGENY NFT that can be activated into a BEAST NFT xcpinata.com/progeny-beasts
Whitelist form👇 https://forms.gle/8DPJtrPmKy7hLj5Z8LinkOfficial site of artist XCPinata, OG Crypto Artist, 🎨 Founder of SCARAB. Creator of XCPinata | M.O.A.A | Progeny & Beasts | PunchPuff | Lil’ t 🖼 Exhibited @ Bitcoin Renaissance. Artist at play in blockchain protocols.
-
The best investment is Bitcoin.
-
Can someone tell me why I keep losing the image from my CoinDaddy description?
It only seems to happen on some and not others? Totally confused as to whats causing it.
For Example xcp.coindaddy.io/HAPPYXMAS.json has lost its image but xcp.coindaddy.io/COVERTPEPE.json has not yet they were set up at the same?> -
AND
-
do you know why I keep getting a Star appear in front of my description?
I've changed it twice now, once in FW and once in CP online and both times the star gets added, I do not put it in, am so confused by this -
C&P the 3 boxes in one shot ....
-
😉
-
they're small issues but man do they drive me nuts.
the * I've had before and managed to get rid of by using CP online to update, but last time it didnt work :P
and the json issue, mind blown. NO idea why it wont pick up the image data when I flip to coindaddy desc. -
Didn’t the asterick come when using TAB to change fields in asset creation form??
-
admittedly BTC chain being so slow exacerbates the problem cos it all takes so long to see if the update "stuck"
-
The asterisk only appeared once minted, it wasnt there when I pressed the OK button to mint, so its an add from somewhere. Am guessing I can get rid of it somehow.... I shall hammer away (ideally when the network is less clogged)
-
Not at this time… the json apis are the closest thing at this point
Official Counterparty Chat
Public archive of Telegram messages.
- 01 Jan 2022 (17)
- 02 Jan 2022 (7)
- 03 Jan 2022 (13)
- 04 Jan 2022 (33)
- 05 Jan 2022 (38)
- 06 Jan 2022 (142)
- 07 Jan 2022 (98)
- 08 Jan 2022 (32)
- 09 Jan 2022 (70)
- 10 Jan 2022 (28)
- 11 Jan 2022 (55)
- 12 Jan 2022 (120)
- 13 Jan 2022 (99)
- 14 Jan 2022 (31)
- 15 Jan 2022 (43)
- 16 Jan 2022 (61)
- 17 Jan 2022 (117)
- 18 Jan 2022 (134)
- 19 Jan 2022 (113)
- 20 Jan 2022 (84)
- 21 Jan 2022 (28)
- 22 Jan 2022 (90)
- 23 Jan 2022 (118)
- 24 Jan 2022 (51)
- 25 Jan 2022 (31)
- 26 Jan 2022 (67)
- 27 Jan 2022 (44)
- 28 Jan 2022 (30)
- 29 Jan 2022 (68)
- 30 Jan 2022 (72)
- 31 Jan 2022 (51)