- 07 October 2021 (25 messages)
-
very busy right now with dogeparty stuff... but if you crate a support ticket on coindaddy.io i'll look into the issue for you -
Looks like just had to wait a bit. Tnx
man -
Similar methods worked well for Philip K Dick and Hunter S Thompson. -
Big @WTHAuctionHouse Counterparty auction this weekend...
Session one at 22:00 UTC Saturday night
Session two at 08:00 UTC Sunday morning
Two sessions, 30 Lots each.
We have 33 dank Lots submitted so far.
House will reserve 6 Lots,
So there are 21 Lot slots remaining.
Artists and collectors, hit the link in the Pinned Post if you want to sell any of your Counterparty assets! -
DesktopCommandoTo celebrate #rarepepes finally becoming a whole collection I have designed this commemorative set of XCP NFTs. I have setup a dispenser to pay out 36 tokens per 0.067 BTC. 50% of sales to be donated to Counterparty.
-
Oh that’s cool, very creative -
-
just scroll in to see each tokens name all over the picture
-
One wallet
-
The way exchanges work is all funds are deposited into a hotwallet and they have records for how much XCP belongs to what user in their system
-
Matt Furie Adds to 2016 NFT Card Collection — ‘Rare Pepe Directory Is Complete,’ Says NFT Wallet Creator
https://news.bitcoin.com/matt-furie-adds-to-2016-nft-card-collection-rare-pepe-directory-is-complete-says-nft-wallet-creator/Matt Furie Adds to 2016 NFT Card Collection — 'Rare Pepe Directory Is Complete,' Says NFT Wallet CreatorThe creator of Pepe the frog, Matt Furie, has added his flare to the mix with a special NFT featuring his original green amphibian creation.
-
anyone know what the seed standard and derrivation path of freewallet.io is?
-
tess - 08 October 2021 (34 messages)
-
Hi, can some tell me how to create a custom asset name on counterparty? -
I created one but the asset name is a string of numbers A11108308507282498855
-
I would appreciate any advice how to do this :)
-
Tip? You can sell it in dispensers
-
Or send to dex trade
-
These videos are all the same for Counterparty. https://dp.university/curriculumDogeparty University
Learn how to mint and issue NFTs free at the DPU. With our short video classes, you can be creating your own Doge NFTs on chain in just minutes. It doesn't matter if you are brand new to crypto or a seasoned vet, Dogeparty University classes are easy for everyone.
-
I don’t know what you mean? You can buy NFTs with xcp on the dex
-
Watch the videos above if you don’t know how. But use freewallet.io desktop, not Dogewallet
-
Dogeparty is going to have a huge positive impact on Counterparty, it’s exciting.
Not trying to shill Dogeparty, but the DPU is literally the same info/design. -
Send them to me, I’ll give you my address
-
-
DPU also has a lot of the info on it
-
🙏
-
Rare Doge Directory
Today we are proud to announce the Rare Doge Directory where anyone can submit their doges for inspection by the Rare Doge Scientists. raredogedirectory.com Tgram: t.me/RareDogeTraders #RareDogeDirectory #RareDoge #RarePepe #Dogecoin #Dogeparty $XDP #NFT #NFTs #FeelTheBern
-
Do any of the videos show how to create an asset icon to replace the default Counterparty logo?
-
Need to use coindaddy, verify address, replace icon free
-
Coindaddy.io
-
Ok thanks again I'll give it a try
-
Very easy… just replace icon 1, it will take 24 hours to show…
-
Great 👍
-
Is there any distributed file system we can use for asset/NFT's on counterparty. Like ipfs?
-
not currently... I do plan on implementing support for ipfs on xchain.io in the coming months... so at some point, yes ipfs will work if you wanted to store your file on ipfs
-
Ok thanks for clearing that up for me :)
-
Would be great to add the distributed file system feature
-
hey @jdogresorg
i just funded a SegWit address with BTC and XCP from my FreeWallet but is not signing txs. Different from other addresses that do work.
When I tried to inspect the Priv Key it says FALSE.
What could be happening? if that address didn't came from the original wallet, then where did the address came from? -
hey @jdogresorg, does counterparty treat the xcp/pepecash orderbook differently in some way? we are having a hard time finding the data in our node. but it does appear to have a lot of open orders as per freewallet
- 09 October 2021 (37 messages)
-
at last!!!!!
-
No -
All assets treated the same
-
weeeeird
-
all dex orders exprie after 8k blocks or so right. so only orders younger than that will be open
-
100% -
You can set expiration with a bounds
-
Rpw just sets it for you
-
Makes life easier
-
Remove and reimport private key
-
@hodlencoinfield you know how RPW advises to set a match price slightly above/below the ask price? Is this only adviseable when there are multiple asks or what is the rationale behind this anyways? -
All assets are treated the same
-
Yea 8064, 56 days about…I think because feb is only 28 days long so that’s where they came up with that number.
-
144 10 minute blocks a day * 28 * 2 (months) = 8064
-
But I really have no idea, that’s a guess why it’s 8064 max
-
So far we’re at 700k doge BERNed for Dogeparty.
We still have 54 days left.
Most of this money will be flowing into DP protocol development, so guess who else will get the upgrades -
-
Floating point math
-
Mainly for trading when people set wacky prices using all 8 decimal places
-
hey fellas, does anyone new how to format a multisend in freewallet? Cant find anything on the interwebs -
anyone else keep getting server error trying to send btc? -
posting here trying to help my message gets deleted
address, assetname, amount,
address, assetname, amount,
address, assetname, amount, -
Right click on any one of your cards, then choose multi send and fill in the info as @OoakosiMo listed above -
From FreeWallet desktop
-
ohh i see, sorry completely overlooked that! Thanks so much 🙂
-
No problem
-
Counterparty friends.... we have an auction in just over 16 hours...
https://t.me/WTHAuctionHouse
Lot distribution across collections looks like this -
Who's ready and registered for the Rare Pepe and other Counterparty collectibles auction?
It's on in 14 hours!
https://roaringauctions.com -
yes i did solved the issue.
Apparently when you import different wallets with different seedphrases into your FreeWallet desktop app all the addresses keep showing up from either wallet. So for example if you log out from wallet A and log in with wallet B, you still see all the addresses controlled by wallet A but no actions can be taken from those adresses like sending funds or creating assets, nor you can inspect the priv key, it just shows FALSE.
The solutions is to import the correct seedphrase that controlls the address you're willing to use. If you keep all your seedphrases then you're good.
I imported one by one all the counterparty seedphrases I keep and each time i tried the 'view private key' option until i found the right one ;) -
We now have 70 #NFT Lots sequenced across two live #Auction sessions, kicking off Session One in 11 hours!
Featuring #RarePepe #SoG #SpellsOfGenesis #Memorychain #MafiaWars #Bitcorn #BitGirls #DogeParty and more!
Inspect the Lots and Register to Bid at https://RoaringAuctions.com -
Correct
-
It appears @FenrisMau created it. Contact them with your address and txid and I imagine they'll send you the XCP you were trying to buy. - 10 October 2021 (65 messages)
-
Basically you want legacy addresses and Segwit addresses. But not p2sh yeah
-
Afaik
-
Dispensers don't like p2sh
-
And make sure you know your bip 39 path etc. In case you have to import the seed to another wallet to extract the private keys
-
Hey guys I completely forgot I had this chat been in the other chat quick question so i have a pepe to upload but it keeps getting changed to mp4 does the xchain counterparty wallet support mp4. I don’t have much XCP so I don’t wanna mess anything up -
Hello XCP people, i have a guy i handhelded to open a dispenser on a normal dedicated BTC wallet (not his main wallet) .... now he is having the problem that the XCP has been dispensed but the wallets in the list of his addreses are not the same then yesterday, he now does not have the dispensed wallets any more in his freewallet overview and he has not stored the private key as i told him to do for each dispensing address -
any hints on this on how to see the wallets again?
-
I have multiple address (in freewallet) that I have labeled them. Is there a way to save/export the settings so as if I would like to install freewallet to another PC, to import the settings? (is there a file where all settings are being saved?) -
Does anyone know what's up with Indiesquare? Is the company dead? Just tried starting the app on my phone and it doesn't seem to functional either -
Logout, close wallet, reopen it, put in 12 word passphrase, should rebuild wallet
-
Not currently
-
i told him already to do so, also to try using another user profile, but obviously that didnt help
-
Only way addresses get created is via importing a 11-word passphrase or importing private keys…. Musta been using multiple 12-word passphrases…. It’s the only thing that makes sense
-
yes his error description doesnt makes sense for me either, i had him reinstalling the freewallet at the beginning, because he created a new wallet after initial start and did not import his seed at the first beginning and had troubles creating a dispenser or something
-
will tell him to do format C: or use a blank new computer
-
send him instruction on how to create a new user account, but obviously that also didnt helped him, cant verify
-
thanks for clarification
-
No need to format, just logout and login with 12-word passphrase or use dif computer
-
told him to do exactly that and he insist the problem persist
-
you never know what a user really is doing on his end 😹
-
what is the minimum BTC balance needed in an addy (where the dispenser is) to close the dispenser? For example, if I want to broadcast the closing dispenser transaction with 0.00001 BTC txFee, what would be the minimum BTC balance needed in my addy, so counterparty/freewallet to be able to broadcast the tx without any error messages? (I guess more than 0.00001 BTC ?) Is there a pattern like (tx amount + x btc amount reserved as balance) ?
-
you SHOULD be able to just send the fee over and do a transaction which uses just the fee.... but, if that doesnt work, will need to send a bit more BTC over, close the tx, then sweep/move the BTC
-
The issue is that I have many dispensers in different addys , and I do not want to send like $10 in each addy for tx fees, just in case....
-
I have been able to move all BTC out of my address in the past week by just using MAX then deducting the tx fee from it... so it SHOULD work
-
Thanks a lot for the prompt reply !
-
give it a try on one address and check that it works for ya first 🙂
-
prolly send 0.0001 to the address... bitcoin wont let you send dust, and your tx fee is going to be less than the dust amount prolly
-
👍
-
yeah, that's an issue actually. If I sent 0.00001 and it is not enough, by sending 0.000005 more, it will prolly not fix the issue, since closing dispenser transaction will need 2 inputs then, and prolly considered as dust... am I saying/understood that correctly? 😬
-
Can divisibility be change after a token is created but it is still not locked? -
Not yet
-
Is there an easy way to send all xcp assets to another address?
-
Multisend -
Sweep -
when a new asset created where does the 0.5 xcp go?
-
Nowhere -
so there is no fee?
-
or it gets burned?
-
anyone know what burn address it is where it goes
-
the address that has "hailordkek"" in it is a burn address, right? -
yes theres manyu
-
ok i was just wondering to get an idea how many been issued lately
-
can you feed a seed to sweep? or only the private key. i guess i can extract the key
-
any idea of the derivation path used by freewallet.io or rarepepewallet?
-
if its a bip39, I assume it is
-
im actually trying to get the master private key, so I can sweep dust
-
we use custom derivation path
m/0'/0/0
m/0'/0/1
m/0'/0/2
m/0'/0/3
... etc
last number is address index -
in the future, please try searching teh chat for an answer before asking.... saves us all time having to repeat things taht have already been answered multiple times
-
BIP39 is a specific wordlist... nothing to do with derivation
-
you should be using COUNTERWALLET wordlist (the default in counterwallet and freewallet) and not worry about the derivation path
-
you can dump the private key to any address generated by the 12-word passsphrase, and then import that address into electrum or somet other wallet and not have to worry about derivation
-
or use JP's electrum tools
- 11 October 2021 (60 messages)
-
I'm basically trying to import it into electrum. My bad i was googling it but should have searched this chat.
-
Sounds like it's not bip39 then that's good to know.
Does it have a master private key? I've got probably 15 address with 10 bucks each.
🙏 -
"master private key"
-
your 12-word passphrase is what generates the seed
-
the seed is used to generate addresses
-
you can dump the private keys for individual addresses and just import those into electrum
-
prolly the best method.
-
Other wallets will have a xpriv or xpub which are the master keys from which normal keys are generated. That's what I mean. But if that's not available then yeah, one at a time it is.
-
If a CP asset was sent to a wallet using xpub, would anything happen? I’ve always wondered this?
-
xpub afaik is just a way to generate normal public/private keys. like a tree and its branches. you dont send to an xpub, you send to the adresses it generates.
By the same logic im sure you can extract the private key 'somehow' and import into free wallet. -
trick is making sure you know how the private keys are generated
-
not all passphrases are made equal
-
ok here's a post with some relevant details, thanks for jdog for the key word. this will help.
https://counterpartytalk.org/t/possibility-of-bip39-electrum-seed-in-counterwallet/3827Possibility of BIP39 Electrum Seed in CounterwalletCounterwallet uses a different dictionary than BIP39. The CW dictionary consists of 1626 words where any 12 word combo is a valid passphrase. BIP39 has a 2048 word list where a valid 12 word seedphrase must pass a checksum test. AFAIK Electrum uses a subset of these seedphrases. What’s interesting for our purpose is that CW can continue using its default format AND allow the option of logging in with a BIP39 phrase. It can check the login for a CW passphrase as normal. If it fails, check if ...
-
J-Dog Counterparty Donation Lot getting Danker by the hour
Some background:
J-Dog built and maintains two critical components of the Counterparty ecosystem: xchain.io block explorer & Freewallet.io
He now aspires to leave is full time fiat job to devote all attention to continuing to improve these and other Counterparty products.
All funds from this auction go to him to help achieve this goal.
The auction lot includes all tokens in this address 👇
https://www.xchain.io/address/1ANCBE1YyQiu1r372Ecp8yavnkwyF6tzhz
Donations to the address continue to be graciously appreciated 🙌
Auction Page
https://scarce.city/auctions/J-Dog-donationJ-Dog Counterparty Donation Lot | Scarce CityAn online marketplace for Bitcoin goods and Bitcoin NFTs
-
-
-
added a KANDINSKYPEP
-
woah!
-
thanks dennis! Thats sure to pour some gas on the auction!
-
well I was obv bested by MrHansel and his Pepbot
-
-
which is *californiagirlhand* INSANE
-
Damnnn nice!
-
idk if this is the right place to ask, but I see that FreeWallet has theme drop downs but it hasnt been rolled out? is there a specific file i can edit to make a custom theme? -
I don’t think so
-
Wow, we’re almost at 2k members
-
-
Nice! -
-
Anyone know if there's a way to compress gif files without messing up the art? We used something called image magic but it just ruined all gifs.
-
no, i have not... it was reviewed a while ago by the founders and just never merged.. not sure the reasons, and the codebase has changed a good amount since then... might be worth revisiting in the future
-
all the addresses generated from a 12-word passphrase are indexed (ie, they appear in the exact same order)... if your not seeing them in your wallet then perhaps you used a different passphrase... cuz the 12-word passphrase always accesses the same addresses
-
it is not random... so no need to generate 100K addresses looking for one
-
they are indexed.. ie in order
-
what I am saying is your chasing down a wrong path... your looking for an address... the addresses are generated in order.. no way that counterwallet or freewallet generated thousands of addresses... so your wasting your time generating 100K
-
perhaps you used a slightly different passphrase... maybe a word was capitalized or something
-
dispensers are just normal addresses generated by the wallet
-
counterwallet generates address 1, checks if it has a BTC blance, then moves on to 2, etc.. until it hits an address with no BTC
-
freewallet generates the first 1 addresses
-
so not sure how you "lost" an address unless the passphrase/seed is different
-
yes.. in freewallet you can click "add new address" and it will add them one by one
-
Counterparty works with bitcoin addresses.. there are not "XCP addresses"
-
only differences are the custom wordlist (counterwallet vs BIP39) and the derivation path are different
-
-
search this chat for "derivation"
- 12 October 2021 (64 messages)
-
Correct address #1 is first address generated
-
No cookies…. All data stored in localStorage or SessionStorage
-
Added a JPJA -
Try my old project CounterTools. Google it, you'll find it on jpja's github. Download zip, extract and run locally in browser.
-
any chance dispensers will also support the buy side? For exmaple, I can send 500XCP to a dispenser and request someone send me NOFAPPEPE
-
not that this time... .that is not how vending machines work... vending machines sell items for a set price... you don't put $10 into a vending machine and says "who wants to sell me a candy bar for this price"..... that is what the DEX is for
-
dispensers are akin to vending machines, selling a specific item for a specific price
-
ah ok...so RPW uses the DEX
-
thanks J-Dog
-
correct, RPW is a REALLY slick interface over the DEX 🙂
-
good to know. Works well
-
Whoa, 0.004505 BTC Miner Fee! I hope you find the seller @nipdog
-
The seller obviously knew there were two buyers for the one card. You can see they moved the two .033 payments out of the dispenser address (well .06 of it anyway): https://blockstream.info/tx/4d0ded08fb8936a2baa908bbdfd262eeb0fd3c9527d312f4398462b638364400Blockstream Block Explorer
Blockstream Explorer is an open source block explorer providing detailed blockchain data across Bitcoin, Testnet, and Liquid. Supports Tor and tracking-free.
-
I think you are looking for the owner of wallet 15JxL5PYVHTLkz7FhTS1J82VkEbtmw6REt
-
Have you posted in the main Rare Pepe room?
-
The OG's sometimes recognize wallet addresses. That one has moved more than 2 BTC in and out so it's a busy seller IMHO
-
any risk of setting up dispensers on a segwit address?
-
is it just me or is the fee calculation quite off in the wallet? Quotes 0.0000265 but then i get an error that it needs 0.00025. Off by a factor of 10.
-
they work fine on segwit... only risk is ppl can't send to segwit addresses from freewallet mobile or RPW
-
so.. best to stick with normie addresses
-
👍
-
J-Dog Counterparty Donation Lot | Scarce City
An online marketplace for Bitcoin goods and Bitcoin NFTs
-
Charity auction is now live 🙂
-
i've actually seen something simliar for DogeParty wallet where having 1 doge in the wallet won't let me send
-
yeah... javier and I are looking into that issue with the 1 DOGE in wallet but not able to use it... should be fixed in future release
-
thx dude
-
hope u raise $1M and can do this fulltime
-
-
you can use blockchair.com to check your tx and see how much is in the utxo that the miner fee is pulling from. If you create a new tx that uses a fee that is equal to or lower than the remainder, it should create a child pays for parent, assuming you're paying a higher fee. mempool.space is good source to get an idea of the fee needed, and it will show if you have a CPFP along with your effective rate when searching your txid.
-
@jdogresorg Hey have you had any time to think about the issue with importing different addresss scripts into freewallet? I havent been able to solve it yet. -
It's a good practice of time preference, having a pepe at an address where I can look at it but not touch it, i guess
-
Not yet…. Been too busy with dogeparty.net and raredogedirectory.com ….. maybe I can find some time next week
-
are there many raredoges yet?
-
this is the first I'm hearing of them
-
It is possible to code a txn that would include transferrence of an xcp asset that could be entered manually in the bitcoin console, rite? or wrong...
-
yes, you can use the CP API to generate an unsigned transaction for any bitcoin address, then could sign that bitcoin transaction with a bitcoin wallet.
-
-
Guess I can't complain about having to learn something new to get shit done
-
not yet... scientists still reviewing the submissions
-
expanding your horizons is always a good thing 🙂
-
that's how it always goes, isnt it? need tools to do your own work
-
think ill join the bern
-
-
Is it necessary to do the full bitcoin IBD to run xcp node? I have too many bitcoin nodes already...
-
Was just about to install and then realized it includes bitcoind
-
api.counterparty.io... you don't need to run a CP node to interact with CP API
-
Thabks vm
- 13 October 2021 (176 messages)
-
api.counterparty.io answers that question
-
YES there is a testnet and YES it is active
-
also can view testnet transactions on testnet.xchain.io
-
-
J when i register an asset with 0 issuance at the beginning, i do not see it in my wallet, how do i make it visible or is the name gone now?
-
you gotta have at least 1 issued to see it in ur wallet
-
it's still there, just issue
-
and how may i change the quantity if i do not see the asset in the wallet, or can i still create new subassets under this primary asset with quantity 0
-
you can still name the asset in the "Issue Supply" box
-
then boom it will pop up in ur wallet
-
ahhh
-
so i just do it with another asset
-
if you have asset MYASSET with initial supply of 0, just type MYASSET in to the "Issue Supply" box and create 1 or more supply.
-
now i got it
-
thought i go via another asset and choose from an assetname list there
-
magic
-
thank you Ashe
-
ur welcome 👍
-
gotta know this and now i can help others if i see the same question
-
this is interesting, i do understand now also how to change the desc. when issuance is 0 and i do not see the asset in the list with 0 supply
-
is it still possible to create subassets with primary asset supply 0?
-
or do the primary asset need to have issuance 1 to be able to create subassets?
-
freewallet only shows asset BALANCES.. not ownership, that is why it is not showing up in your asset BALANCES list, cuz you have no balance
-
understand makes sense
-
its a balance list, not an asset list
-
thought its more of an asset list and it will show all asset regardless the amount
-
nope, not at this time
-
good to know, and for the creation of a subasset, do i need to have balance minimum of 1 or is there another way to create a subasset for an asset with 0
-
you don't need to have supply issued to create a subasset
-
if there is a tutorial i would be glad to read and learn about it
-
just enter the full subasset name... like MYASSET.subasset_name_here
-
-
no tutorial necessary... I just told ya how to do it
-
thats all? wow easy
-
yes, easy peasy 🙂
-
lol yeah, no tutorial for this necessary
-
thank you very much
-
very easy
-
i expected a right click on asset name in the list to create a subasset
-
maybe in the future
-
it is a good security aspect not to see the main asset in the balance list when issuance is 0
-
what u dont see cant do an error with it
-
or others who are not pretty familiar, like secretary or else
-
imagine having ur secretary managing your assets and then destroying supply or else
-
tried going back to issuance 0 from 1, not working lol ok i know it now whats possible and whats not
-
Darn neither electrum nor core will sign and broadcast this txn from me. When I decrypt the raw txn something looks wonky with the recipient output... This is the txn as i put through the api:
{
"method" : "create_send",
"params" : {
"source": "bc1qml5hl6jp32z06728m2eculcsj2vayaevnpx58w",
"destination": "1LnaWxuVoQB6dHjySY98bfTRMzem4QygmV",
"asset": "GURUPEPE",
"quantity": 1,
"allow_unconfirmed_inputs": "true",
"fee": 2000
},
"jsonrpc": "2.0",
"id": 0
}
This is the raw txn:
020000000001012576116b1a9ae27c300d4aee4639aa4d9d81b73604ddc18e49575c0a3e0713a400000000160014dfe97fea418a84fd7947dab38e7f109299d2772cffffffff020000000000000000306a2ea9ecfa3cf87c2f900cf5514eb81c253e4c005137709e5e7a60e23f5b505b9050f3674f07e11fcc856e195f05be25581b000000000000160014dfe97fea418a84fd7947dab38e7f109299d2772c02000000000000
And this is the decoded info:
00:15:18
{
"txid": "d352a00d609709617871c365c2d33141e26a4be3754014d1032e7acaa46c879d",
"hash": "2114067fffa22795211c691da7b4b1eedecb84678740c6e37c7d71df3690fb70",
"version": 2,
"size": 166,
"vsize": 163,
"weight": 649,
"locktime": 0,
"vin": [
{
"txid": "a413073e0a5c57498ec1dd0436b7819d4daa3946ee4a0d307ce29a1a6b117625",
"vout": 0,
"scriptSig": {
"asm": "0 dfe97fea418a84fd7947dab38e7f109299d2772c",
"hex": "0014dfe97fea418a84fd7947dab38e7f109299d2772c"
},
"txinwitness": [
"",
""
],
"sequence": 4294967295
}
],
"vout": [
{
"value": 0.00000000,
"n": 0,
"scriptPubKey": {
"asm": "OP_RETURN a9ecfa3cf87c2f900cf5514eb81c253e4c005137709e5e7a60e23f5b505b9050f3674f07e11fcc856e195f05be25",
"hex": "6a2ea9ecfa3cf87c2f900cf5514eb81c253e4c005137709e5e7a60e23f5b505b9050f3674f07e11fcc856e195f05be25",
"type": "nulldata"
}
},
{
"value": 0.00007000,
"n": 1,
"scriptPubKey": {
"asm": "0 dfe97fea418a84fd7947dab38e7f109299d2772c",
"hex": "0014dfe97fea418a84fd7947dab38e7f109299d2772c",
"address": "bc1qml5hl6jp32z06728m2eculcsj2vayaevnpx58w",
"type": "witness_v0_keyhash"
}
}
]
} -
Anything stand out as bad input on my end?
-
Nope looks like a standard send with send data encoded in op_return
-
Wallet should reset entirely on entering new passphrase but sometimes seems that happens…, best to just enter your 12-word passphrase from beginning
-
Or use created wallet…. Or write down passphrase like wallet makes u confirm you have done
-
Can’t do more than make u confirm you wrote down 12 words before proceeding…. If you don’t do it and confirm in wallet you did, that’s on u
-
Follow directions, read all warnings, write down what wallet tells u to (and makes u confirm u did)
-
Sorry for any issues…. But ppl speed through shit and don’t read then get upset they didn’t follow directions…. Only so much I can do to protect ppl from themselves….. making them confirm they wrote down 12 word passphrase should be enough
-
Thanks for this feedback…. Will work on finding/fixing issue where addresses from multiple passphrases exist… should solve issue going forward
-
Should only use one passphrase not multiple
-
Making sure addresses reset fully when switching passphrases should resolve issue
-
Will work on update for next release
-
At bar but will send ya $100when back at home
-
-
Ok so electrum shows that it's signed but when attempt to broadcast says server error, "witness requires empty scriptSig"
-
Same with core
-
non-mandatory-script-verify-flag (Witness requires empty scriptSig) (code -26)
-
Blockstream Block Explorer
Blockstream Explorer is an open source block explorer providing detailed blockchain data across Bitcoin, Testnet, and Liquid. Supports Tor and tracking-free.
-
make sure address list resets between 12-word passphrase change · Issue #75 · jdogresorg/freewallet-desktop
some users are reporting that when changing 12-word passphrases the address list from the old passphrase persists.. need to make sure that address list is entirely blown away/removed when user rese...
-
created issue for reported problem... will work on getting it fixed in next release
-
If we had a big bag of money to give Brian, right away haha
-
If it's pending still then the card and BTC will be settled once it's confirmed
-
Are you trading on an XYZ/BTC pair?
-
Because for that to settle the other party needs to sign separately
-
Better to trade against XCP or PEPECASH
-
Yes
-
Yes
-
And mostly they don't
-
using BTC on the dex to buy something requires the user to use a wallet like freewallet.io desktop wallet which monitors for order matches and sends BTC to pay for the order match within 20 blocks..... if your SELLING something for BTC, then you can expect to get some order matches which expire cuz some ppl dont understand how BTC on the DEX works.... your card is not lost, it is escrowed on the dex, and will remain there until either someone pays you the BTC for the order match, or until the order expires and your address is credited back the card/asset... have no fear, nothing is lost on the DEX, just using BTC is a bit more complex than most orders on the DEX which are fire-n-forget style orders
-
close... the submit a buy order, then when the order matches, they have 20 blocks to send a BTCpay transaction to pay for the order match, or the order match expires and your card becomes available again for someone else to try and buy with BTC... rinse and repeat until the order matches with a BTC buyer who actually sends the BTC before the order match expires
-
no worries, its good to ask questions about stuff which is not straightforward... and using BTC on the DEX can requires some explaination 🙂
-
probably even with understanding ppl feel that ask also is better. no stress
-
yup
-
life has no meaning any more
-
No Pepe, No Life! -
I transferred ownership of an asset to another address, the transaction shows valid but the asset is still listed in the originating address, i tried sending it again and it said can't transfer because asset in 2nd address, did I need to lock the asset before transfer ? -
No Doggo, No Life!
-
-
-
check destructions.... using destroy supply function actually destroys some of the supply and reduces the total supply displayed on xchain
-
lock only locks you from issuing additional supply... nothing to do with transferring ownership... coulda just been xchain lagging a bit (was some downtime a few hours ago)
-
Right click - change description - add picture via imgur like this imgur/XXXX.png; MY ASSET TEXT
-
yw
-
-
Close freeewallet and reopen… reinstalling won’t fix a networking issue which is prolly what it is
-
this is from in freewallet
-
Rarest. Few.@muneeb @CounterpartyXCP quenching that maxi thirst for NFTs since 2015.
-
signing is a wallet issue... try changing addresses then changing back... or worst case logout entirely, close wallet, then re-open and re-import 12-word passphrase
-
divisible cards work that way, someone can buy a fraction... hence why for cards the NON-DIVISIBLE card is best
-
when the card was created, the asset owner choose to make the card divisible 1.00000000 instead of 1
-
this is not something you can control, only the asset issuer can at the time of issuance... just letting you know that with divisible assets/cards, you can buy a fraction of the card... it is normal behavior for divisible cards 🙂
-
correct... can just paste in hash from order to cancel
-
with a dispenser, you can control the "give amount"... and set it to 1.0000000... so that you only sell 1 entire token and not a fraction
-
Hello all, may I ask a question? -
is there any way of customizing colours in wallet?
-
want terminal like colors, green numbers & fonts with black background
-
white background wrecks my order with rest of desktop 😂
-
dark theme would be good
-
awesome idea
-
thanks, I noticed it now when I was customizing my fresh desktop
-
ur new windows 10, niceeeee
-
haa-haa, I removed windows as soon as I booted in and heard corona or what's her name
-
🥳
-
I am fine with editing some lines of code also, if someone could tell me where to look
-
or what to google for
-
Has anyone had an issue closing a dispenser? I closed one, transaction confirmed but the dispenser is still open
-
thanks, will give it a shot
-
Hi everyone, I’m trying to figure out how the pepecash dex works. I have a buy order for an asset that is higher than the lowest sell order for that asset (in pepecash) but the buy isn’t going through (it’s just sitting on the dex) any thing I’m missing here? -
This doesn’t happen on the xcp dex FYI
-
What I mean is pepecash pairs with an asset
-
Yes the buy order is on the market
-
And there’s a sell order on the same market that is lower so they should be filled right?
-
So for example there’s a sell for 2000 pepecash and I have a buy order for 3000 pepecash, so they should match right?
-
@jdogresorg someone said to ask you this
IS enough to create a transaction with that exact OP_RETURN OUTPUT?
If it is, then you can either make the transaction in a wallet that supports OP_RETURN (electrum, maybe?) or create the transaction manually -
And about the txn I created, he said
-
-
Tx has to originate from the source address
-
Please just wait until I get a chance to work on the private keys import update in freewallet
-
Very busy, don’t have time to keep answering random questions like this
-
Or create an issue on counterparty-lib on GitHub with details of issue and wait for it to get fixed
-
Some ppl working on faqs n a wiki already
- 14 October 2021 (53 messages)
-
-
7+ years and no XCP listing... yet they list shitcoins on the daily... Coinbase started down the wrong path peddling shitcoins a long time ago... they have turned to the dark side 😛
-
why do u think that is? Is it difficult to get a node up? what would hold them back?
-
it is literally like 4 commands to get a CP node up.... You would need to ask Brian why he hasn't listed XCP... only he knows.
-
we should start tweeting at him
-
XCP is too fast and too cheap for anyone who's interested in profiting from smart contracts or tokens or all the stuff that ethereum supposedly "made possible" most of which were already happening on xcp
-
Also, no one controls it, and development on the bitcoin network will always prioritize security before features, so it isn't as easily manipulated for whatever the hot new money idea is. Also it's never been scammed so it would be impossible to claim no responsibilty for all the projects who's investors got taken for all their money
-
never been hacked i should say
-
I think mainly bc the counterparty foundation burned btc, unlike the eth foundation that collected billions of dollars worth of btc and had funds to market and financially incentivized ppl in control
-
690 GB
-
thats current eth "full" node
-
an "archive" (actuall full) node is
-
Can't even find it rite now, last year it was over 4 TB
-
💩💩💩
-
6TB+
-
according to ethereum.org
-
not true... was hacked once right around the time of the launch... but the hacker was a whitehat and gave back all the funds ... https://counterparty.io/news/two-bitcoin-security-experts-to-audit-counterparty-code/Two Bitcoin Security Experts to Audit Counterparty Code | Counterparty
An anonymous white hat hacker recently discovered a vulnerability in the counterpartyd code, which he exploited to steal 35,000 XCP from Poloniex, a centralized exchange on which XCP is traded. The bug was quickly fixed and the fraudulent transaction invalidated, but not before the attacker sold the stolen funds for approximately 115 BTC, which he
-
My mistake; I was referring to bitcoin which xcp runs on, but I was also not aware of that incident
-
few are... it was very early on
-
Which is what you would expect from a new project that was on the way to being secure but had soft spots starting out
-
when somethings been around 7 8 years
-
and there are still hacks (doesn't matter that its stuff built on eth, bc thats what the intention was) its inexcusable
-
So it could've been anywhere, or was poloniex especially vulnerable for some reason
-
coulda been anywhere I believe... not sure the tech details were ever released
-
Yea that's what it sounds like from that article, hush hush
-
if your asking about an order you placed that is still in the mempool... its based on the tx fee you paid... if your asking about an order that is confirmed and matching on the dex and using BTC... then the person buying with BTC has to use freewallet-desktop and enable auto-BTCpay and keep the wallet open and listening for matches and pay for the order match within 20 blocks or the order match expires
-
in the future, please post helpful info like a link to the actual order in question so we don't have to guess what your asking 🙂
-
🚨 New bid for J-Dog Counterparty Donation Lot by 1pepe.eth for 127,500,000 sats ($73,990.94) 🚨
⚡ 13 hrs, 54 mins, 57 secs remaining ⚡ -
I gotta out this in here I am proud of this guy: we have a hero!! bc1qd3q79j9dhssnqrstl8em9ksjhutzq95v4qpzgv just saved the xcp universe with an uberchad 1979XCP bottom market buy! woohoo 🙌
-
-
1A9qZDoUEh8s2yAvLiQM5caakTt542NDtD
the owner of this wallet. please send me a message -
actually whoever gets this is getting a GREAT DEAL... a few of the cards in the auction lot are worth the current purchase price just on their own
-
KANDINSKYPEP, etc
-
Official Counterparty Chat
Public archive of Telegram messages.
- 01 Oct 2021 (72)
- 02 Oct 2021 (103)
- 03 Oct 2021 (77)
- 04 Oct 2021 (67)
- 05 Oct 2021 (38)
- 06 Oct 2021 (135)
- 07 Oct 2021 (25)
- 08 Oct 2021 (34)
- 09 Oct 2021 (37)
- 10 Oct 2021 (65)
- 11 Oct 2021 (60)
- 12 Oct 2021 (64)
- 13 Oct 2021 (176)
- 14 Oct 2021 (53)
- 15 Oct 2021 (56)
- 16 Oct 2021 (43)
- 17 Oct 2021 (75)
- 18 Oct 2021 (10)
- 19 Oct 2021 (32)
- 20 Oct 2021 (19)
- 21 Oct 2021 (28)
- 22 Oct 2021 (104)
- 23 Oct 2021 (13)
- 24 Oct 2021 (27)
- 25 Oct 2021 (52)
- 26 Oct 2021 (136)
- 27 Oct 2021 (29)
- 28 Oct 2021 (37)
- 29 Oct 2021 (17)
- 30 Oct 2021 (45)
- 31 Oct 2021 (32)