- 20 September 2021 (127 messages)
-
check again now a big chunk of tx's just cleared -
might take a minute for the newly confirmed txs to show up on xchain... has to be parsed into counterparty databaes.. then parsed from counterparty database into mysql database (what powers xchain).... but after a minute or so should show -
just wait another couple minutes
-
yep
-
just wait
-
it's parsing
-
then will populate
-
hit refresh. it just showed up for me
-
😍
-
suddenly a 0.00000001 of rpdf card shows up on my freewallet -
its not like bonusbtc,is it?👀
-
-
Joe paid out RPDF to all holders of PEPEPARTY 🙂
-
thanks jdog 👍
-
thank @hodlencoinfield ... he is the one that rained fractional rare pepes down on ya 🙂
-
DANIEL GOT HITSrarepepe twitter spaces in 15 mins boyzz!! if anyone is around @Debussy100 @Vince_Van_Dough @farokh @ScrillaVentura @pepe_designer @shawnleary @shannonNullCode @krybharat @ArtByTenacious @crypto888crypto @KeyboardMonkey3
-
-
-
-
can view all addresses in the wallet from the "Change Address" option.. can also generate new addresses using the "Options" menu item, as well as import private keys to addresses 🙂
-
Hello there. Where can i trade XCP "safe" ? -
Dex looks a bit risky
-
freewallet -
Is not supporting XCP
-
Freewallet.io -
why XCP is pumping so much?
-
what news are behind?
-
I'm a old holder of this c oin
-
Besides the fact it was very undervalued, Pepes have had a major resurgence. People were buying on OpenSea, but many are learning it's best to buy on the DEx. -
A particular Pepe whale recently came back last week and was selling off his collection exclusively for XCP, which accelerated the pump, but he's been selling it back OTC and on Dex-trade
-
How can i add my XCP in Blanaces inside Freewallet
-
only appears BTC
-
I dont know if hold a bit more my XCP or just sell it
-
it's still very undervalued though
-
Yes, it is.
-
It should be there. Are you looking at the correct address? You can compare it with xchain.io
-
I’m trying to hold a bag of XCP between 100-1000, but there are so many temptations to spend it that I’m always finding myself back down to single digits.
-
I would have liked to have had bittrex’s wallet this past week
-
you still have some on bittrex?
-
bought my XCP at Bittrex delisting, when people panic sold it
-
Spent a lot in early 2021 to get BTC to fund listings on exchanges etc...
-
Tried to get back what I sold, but everytime I have some on the wallet, I spend it on cards too 😨
-
No, I was buying all the way down to 5000 sats
-
I only have BTC wallet on freewallet app
-
Its just installed so 0 coins inside
-
but it doesnt appear in BALANCE any other coin
-
should i add by any way?
-
My dispensers aren't showing up on freewallet. -
I'm on desktop
-
Just switch tabs or close and reopen -
My dispenser has confirmed but I don't see it on my freewallet /My Dispensers. I also don't get how to use it. Is it listed somewhere? Do I have to make a page with the details? https://xchain.io/tx/f857a00a0f9fc979cd6eb756df3131f06800451eee8daaf8694549819fe02d57
-
Oh I got it, I need to change to the wallet assigned to it. Sorry.
-
Jdog -
Can you please contact me?
-
I’m with a huge problem with my wallet with a large amount of money
-
Guys thanks a ton to the dev
-
Jdog was super helpful, patient and helped me recover mid 6 figures
-
Super nice guy. Thanks again
-
Your token is worthless probably. Just because it says it’s worth something doesn’t mean it is.
You need to do the research your self. -
Looks interesting
-
Raizer Bridge - An easy way to bridge cross-chain assets | Raizer Project
Raizer Bridge - An easy way to bridge cross-chain assets. Raizer Bridge is a service belonging to Raizer, allows users to exchange Counterparty tokens to other EVM based chains as an ERC token and brings valuable assets. This video will guide you on how to use Raizer Bridge and give a step-by-step guide. Follow us on social media: 🔸 Official Website: https://raizer.cc/ 🔸 Raizer Bridge: https://bridge.raizer.cc/ 🔸 Twitter: https://twitter.com/raizercc/
-
You can cancel your order in freewallet -
What wallet you guys using to setup dospensers? -
freewallet.io desktop - 21 September 2021 (64 messages)
-
I dont see the option for dispenser. Where is it located?
-
right click on the asset and Select Create Dispenser
-
right click on asset and choose create dispenser... or from main menu choose "Create Dispenser"
-
-
Thanks buddy. But i dont see it?
-
What version of freewallet are you using?
-
Probably an older version I will update it try again
-
yep... your on a way old version as it still has "betting".... try downloading the latest version from https://github.com/jdogresorg/freewallet-desktop/releasesReleases · jdogresorg/freewallet-desktop
Desktop wallet for Win/Mac/Linux which supports Bitcoin and Counterparty - jdogresorg/freewallet-desktop
-
When I click on it to view the assets Dispensers, it doesn’t show because probably “10” number of LIST is full, @jdogresorg sir I don’t know what was the LOGIC behind it to reduce this number in last update? -
the logic behind reducing the exchange and dispenser watchlists to 10 is that this is a tool for monitoring a few dispensers that you want to watch.... not for you to setup a list of hundreds of dispensers to monitor, which results in a ton of API requests every 5 minutes for each dispenser watchlist.... some users were abusing this feature so I had to enforce a limit of 10
-
10 is more than enough dispensers watchlists to monitor... I am sorry if you feel that 10 is not enough for you, but that is the limit I am enforcing in the wallet to keep the requests to xchain.io lower..... some users were abusing this feature which was either resulting in a bunch of unnecessary load on xchain.io servers and/or them getting their IPs blacklisted for beating on the servers too hard
-
Oh I didn’t know that, am not technical, still wish 20 at least 😛
-
yes.... but 20 would be at least 20 requests to xchain every 5 minutes, on top of updating wallet history and balances and exchange markets info every 5 minutes... perhaps in the future we can remove this limit, but for now it stays
-
I went ahead and updated your permissions so you can post a link... also did a quick read of your post, sounds interesting... too busy right now to really spend much time thinking it all through, but will dedicate some time to thinking about it in the next few weeks once the xchain scaling drama is over... and welcome to the community... happy to have you here and glad to see your proposing ideas to possibly improve counterparty and add additional features
-
FYI... price oracles will be coming to Counterparty relatively soon to support "oracled dispensers" (prolly early 2022)... and after oracled dispensers next up is updating dispensers to support payment in XCP assets other than BTC, which will also require additional oracles (tho the oracle operators will be able to define their fee for using the oracle feed, and will be able to earn a bit).
-
This is amazing! -
-
right now working on fixing up a bunch of bugs in counterparty before focusing on adding new features... but new features will be coming in the new year 🙂
-
check the pinned messages if you want to donate BTC... if you want to donate xcp assets, you can do so to 1Donatet2LrNpuWByAnH8gc9Wh9zSzZuLC which is the donation address listed on https://xchain.io/about
-
thanks for any donation... much appreciated... still working on getting xchain faster... standing up 3 servers today, hoping to get them all working via the load balancer later today
-
-
we be getting beat on 😛
-
if you want to donate BTC... please do so to one of the above dispensers (in the pinned message) cuz you'll get a token back... otherwise, you can donate any XCP asset to the above donation address 🙂
-
you'll want to have at least one BLACKBOX token in the coming weeks
-
Some small balance here but can’t withdraw, shows error of insufficient balance:
1LJv7s7kYkvPNe4N73PgmGcVmzsqZ9L41 -
strange.. should work... worst case, plug the private key into electrum and move the BTC out of the address that way
-
Ah tried that method many times but didn’t work for me
-
Thinking will donate 1 Blackbox if fixed 😆 (already donated some before)
-
cant import private key into electrum?... very bizzare... you should be able to import the private key into any other bitcoin wallet and send that way if all your wanting to do is send BTC... tho counterparty should work... just need to click "max" btc in freewallet.. .then deduct your miners fee from the "max" amount your sending... could be your trying to send all your btc out of your address and not taking the miners fee into account... try sending out 0.00384780 BTC and use a miners fee of 2000 sats... that should work for ya 🙂
-
will eventually update freewallet to deduct miners fee from "max" amount you can withdraw... but for now, gotta do it manually
-
Yes sir this feature essential to apply
-
got about 1000 other things to work on first.. CP bugs, scaling xchain, hardware integration, new CP features, mobile wallet... plus some other projects i'm working on
-
deduct miners fee from "MAX" btc send · Issue #71 · jdogresorg/freewallet-desktop
need to update wallet so that when user clicks "MAX" to send max amount of BTC out of their wallet we deduct the miners fee from that amount. Right now some users are clicking "MAX&q...
-
created a github issue for it now tho so it doesn't fall off my radar tho
-
will work to get it into the next freewallet release
-
Ok 👍
-
dont do KYC.. they dont do biz with us-based customers.... just do their minimum daily withdraw limits of 0.02 BTC I think
-
p2pb2b.io exchange listing coming online in a few weeks if not sooner, and they support us-based customers who do KYC
-
there is not free daily withdraw... every withdraw charges some XCP or PEPECASH.. and the limit per day is I believe 0.02 BTC worth of value every 24 hours
-
could someone unblock @K0LLECTOR pls from this group. he probably was banned cos not filled the bot when it was here
-
Hey guys. are divisible assets always divisible by 8 decimal places? -
yes
-
cool tnx
-
So what's the deal with dispensers and addresses that start with 3? seems like there's some kind of bug there
-
check github issues for details
-
they dont work... which is why I have marked all dispensers that start with a 3 address as "closed" to prevent users from sending funds to them and losing funds until we get a chance to fix teh issue
-
use normal addresses (start with 1) or bech32 addresses (start with bc1) and your fine
-
no point in even trying to open one on a 3 address, cuz you'll not get any sales and your token will be stuck in the address dispenser until we get a chance to fix
-
its on the todo list... prolly will get fixed at some point next month
-
👍👍👍
- 22 September 2021 (112 messages)
-
@jdogresorg nice work on xchain, blazing fast 🔥
-
+1
-
thanks... got another server coming online in a few hours too 🙂
-
👍👍👍👍👍
-
@jdogresorg any idea why I keep getting this dispenser transaction error? I had a Pepe on this address that was dispensed earlier this morning and now I'm setting up a new dispenser on that same address but I keep getting this error. How do I fix it any idea?
-
You need to use an address that has no tx history of setting up a dispenser on a different address.
-
So you can only set up a dispenser once on a address?
-
it will only allow you set up a dispenser in that way on an empty (fresh) wallet. -
manually activated your account 🙂
-
error signing means that the address index in freewallet.io is corrupted... prolly from you switching passphrases in freewallet (not really meant to do that)... logout entirely, then close freewallet... then open it again and enter your 12-word passphrase... it should rebuild the wallet address list/index and you should be able to sign then.
-
But if the key is not present, doesn’t this mean that the wallet address belongs to another passphrase?
Or not necessarily? -
when you import a passphrase into the wallet it creates a address list and maps the addresses to the index in the wallet.... the private key not being available means that the index is messed up and that when we go to access the private key at the index it doesnt match the address
-
just reset your wallet and stop switching passphrases back and forth
-
its meant to use a single passphrase in freewallet.io... not switch back and forth
-
if you have multiple passphrases... you can dump the private keys from the other passphrase/addresses you want to use... then just import them into freewallet.... then you can use addresses from many wallets... but stop switching back and forth with passphrases or your gonna continue to have this issue occasionally
-
sorry... thought it was ryanson asking... still early.. a bit hungover 😛
-
Hey, I accidentally paid a dispenser from my samourai wallet whirlpool; I know what address the dispenser paid out to and can see the asset there on xchain, but am having trouble when importing/sweeping the private key. If I try to sweep it to counterwallet it says empty address, and when I import it to freewallet it automatically uses the legacy format and the asset doesn't show up. Any ideas? -
Oh perfect thanks for the great explanation. I was actually wondering what was going on when I had passphrase mapping wallet addresses of another passphrase.
-
Makes sense now let me see what I can do
-
#scammer?
-
-
Lol he immediately cleared the cbat history
-
what is the username? The real Shawn Leary is @ShawnLeary -
Chat*
-
-
Any ideas about this? @jdogresorg @ShawnLeary
-
passphrases are not private keys
-
counterwallet doesnt let you import private keys
-
so your talking about a passphrase (12 words)
-
if you dump the PRIVATE KEY for the address, you should be able to import it into freewallet.io... but the 12-word passphrase from other wallets wont work (counterparty uses a different address derivation schema)
-
in the future, only pay dispensers from addresses where you own the private key... create a counterparty wallet at rarepepewallet.com or freewallet.io or counterwallet.io and start using that... and dont pay from addresses in other wallets
-
Was my previous message deleted? -
is there some sort of auto-moderation here?
-
you should be good now... just tweaked your permissions to allow you to post
-
yeah... got auto-mod bots in here that dont like new ppl posting links
-
ah cool, thanks
-
I had a similar issue due to using Monya Wallet at first. Using https://github.com/iancoleman/bip39 I was able to transform the private key - use offline for proper security!GitHub - iancoleman/bip39: A web tool for converting BIP39 mnemonic codes
A web tool for converting BIP39 mnemonic codes. Contribute to iancoleman/bip39 development by creating an account on GitHub.
-
also can work to dump trezor wallets and get private keys... but like Phil says... use at your own risk and use offline
-
I tried importing the private key to freewallet; it defaults to legacy format instead of bech32 and shows no assets. Doesn't counterwallet allow you to sweep a private key to one of your active addresses? Could've sworn I tried doing this and it told me the address was empty
-
I have the private key to the address where the asset is located, of course
-
Yes, I have learned this, like i said originally I made a mistake by paying the dispenser from my whirlpool. As it is, I have the address with some btc and the xcp asset on it, in bech32 format, and I have the corresponding private key
-
prolly need to put p2wpkh: in front of the private key to tell freewallet it is a bech32 private key and not a normie private key
-
counterwallet sweep is old/outdated and daisy-chains sends one by one... versus the sweep in freewallet.io moves everything (assets and asset ownerships) all in a single transaction (except for the BTC)
-
Did not try that; will do and report back. And with counterwallet, nothing happens when I click "sweep" whether I'm using a legacy or bech32 address
-
-
Ahh
-
Gonna wait till I get home to try and imprt to freewallet again
-
/p
-
Ty
-
your name reminds me of a card from another project... but can't mention it here or I will get banned.... search xchain for "amish"... you'll see 🙂
-
Lol this has been my name for 15 years; I need to investigate this now lol
-
lol.. wrong channel.. thought I was in rarepepe chat 😛
-
Hehe
-
-
@jdogresorg, in the fednode, is redis only used by counterblock?
-
had some joy with my CP-API client today, but feeling like im missing on free juicy data still
-
Like, i couldnt figure out how to get mempool from counterparty, but i think that counterblock has a nice representation of it
-
i believe redis is only used in the counterblock / counterwallet instances... but cant say for 100% sure
-
okies....
-
stick with CP API... can pull all data you need from there... counterblock gonna go away eventually I think
-
I was goign to do for a docker prune and reinstall
-
OKies...
-
Inspiration for my first card
-
do you know what kind of method i need to use to pull the mempool?
-
i can get inconfirmed tx for an address, btu i that didnt seem a good fit
-
get_mempool
-
FML
-
😛
-
thanks dude
-
looool
-
Counterparty API | Counterparty
Developers/API.md
-
get_{table} of course... fandabbeeedozeee
-
can filter it just like all the other tables... filter on any field 🙂
-
such blind, i swear I Ctrl-f the page for it lol
-
-
-
grrrr
-
-
amazing, thanks for pointer
-
im there i swear
-
just reached out through the backchannels and asked for the withdraw fee to be reduced to 1 XCP ($25) instead of 4 XCP ($100)... will report back when I hear back
-
Not sure how it happened but my wrapped rare Trump has been compromised on Open Sea
-
-
I did not transfer 6 hours ago somehow f7980c received my pepe through a transfer then listed it for sale and sold it 17 minutes ago
-
I've been trying to figure out what's going on for the past hour and have submit a support ticket to open sea
-
Any ideas on what may have transpired here
-
How did somebody transfer my pepe to another user without me signing the transaction in metamask?
-
series and card are the order in which the cards were put into the directory.
-
this is not an ETH shop... please ask an ETH question in an ETH friendly place... not here
-
Anyone know who's behind XCPFAUCET? It's not part of any collection, there are 50,000 of them and it has been paying out rare pepe dividends (6 times over the past 2 months) -
ok , I will delete this.
-
ask in https://t.me/xcpfaucet
-
Thanks @jdogresorg
-
very good question... maybe ask @shannoncode
-
nope, haven't had a chance to update coindaddy.io in a couple years... been busy.. will work on getting support for bech32 addreses in the future
-
Yeah just trying to dig to the bottom of the problem. I know many people here are wrapping their btC assets and listing on ETh. Not sure how I got scammed but I got scammed for my wrapped bTC asset. May of been a fake offer email i clicked
-
I wasn't referncing you bro... your asking a specific question about a rare pepe on opensea.... not asking about metamask address stuff... was referencing the question Alex Green posted
-
perfect... thank you 🙂
-
Aight
-
@jdogresorg I purchased an XCHAINPEPE some time ago to support the development of FreeWallet.io. Will this token receive same benefits as the BLACKBOX token? -
sure... I'll drop some love on my XCHAINPEPE and FULLACCESS holders as well 🙂
-
Thanks for all you do! I will add some to the dispenser as well. Your story is very encouraging... I'd like to leave my IT job to trade/invest full time.
-
I'm trying to send to the dispenser from FreeWallet desktop, but I can't seem to find the BLACKBOX asset. What am I doing wrong?
-
check pinned messages
-
there are links to a few blackbox dispensers in there... send the requested amount, poof, you get a token back
-
BLACKBOX is just the parent asset with no supply issued... the subassets are what ppl are talking about when they refer to BLACKBOX tokens
-
I think I figured it out.
-
I then clicked on buy now and up showed this dialog box and then I made the purchase there. I think this is correct.
-
that is correct.. thank you for your donation sir ... much appreciated 🙂
-
👍👍👍
- 23 September 2021 (226 messages)
-
Is there a tldr on how to donate to XCP development? -
I'd like to donate
-
check the pinnes messages... links to dispensers where you can donate.. you just pick one you want to donate to and send BTC to the address... poof, you get a token back 🙂
-
how do I cancel a dispenser?
-
in freewallet switch to address where dispenser is setup... click dispensers tab... click "My dispensers".. it will show your open dispensers and there will be a cancel button
-
so the Bitcoin address that would recieve the bitcoin from the purchase, that's the one that can cancel a dispenser?
-
in other words if we used a cold storage address then we would have to load up the private key of that address to cancel the dispenser
-
sounds like it, makes sense.
-
correct
-
use addresses from your freewallet please... not hardware wallets
-
you can... but don't whine when you can't import the private key to cancel
-
ok, if a dispenser is created to pay out more assets than the source address has available then it should not get confirmed right.
-
use addressees in freewallet for counterparty transactions and you'll be fine... will also save me lots of boohoo stories from ppl doing fringe stuff
-
good to know.
-
cant even create the transaction... CP will refuse to create the transaction if you don't have a balance at the time of trying to create the tx.... and if you send the funds out of the address while the dispenser is pending, the dispenser will not get setup
-
uhm
-
so yes, we have checks in place to prevent bad ppl from scamming
-
check
-
dm
-
So getting some weird behaviour with a pepecash dispenser
-
ugh cant paste screen shot
-
-
your dispenser opened fine... just gotta give it a minute to parse the block bro
-
ohhhh
-
gooood
-
if stuff is weird.. wait until tx is confirmed.. then wait 5 more minutes before sounding alarms
-
saves us all some headaches 😛
-
ok thank god lol
-
that was spooky. thanks man :)
-
freewallet.io, xchain.io, coindaddy.io, counterparty.io and some others... yup.. sup?
-
thanks... I didn't like counterwallet so I built a wallet for myself with an interface I would want to use... turns out some other ppl like the interface as well 🙂
-
yeah... ppl run into issues when they swap between multiple passphrases... resetting the wallet and closing it and then re-importing the seed phrase fixes stuff tho
-
will track down that issue in the future... but, not in a hurry.. dont want ppl swapping between multiple passphrases anyway.. one passphrase, infinite wallet addresses 🙂
-
Hi, for some reason I have issues to create a dispenser with some of my NFTs (but it works for other ones). When I enter the main chain rate such as 0.009 (the price I want to sell it) it tells me: The quantity entered must be a whole number, since this is a non divisible asset. Any idea why it says that? -
(this is on counterwallet by the way)
-
one confirm
-
use freewallet.io... counterwallet has issue with non-divisible asset and dispensers
-
Thanks! :)
-
you sure you sent the exact amount?.... if so.. create a support ticket and i'll look into it tomorrow
-
busy with coding right now
-
@jdogresorg just bought a brand new computer, installed freewallet on it and when i run it, it doesnt open but its running in the background. Newest release. Any idea? Sorry to be a pain.
-
R A R E S C R I L L Axchain.io/asset/CITADELP… 1/1 Cover of Citadel 21 Magazine is now a 1/1 #nft on #btc / xcp Citadel21.com
-
strange... kill off the processes and try opening it again.
-
awesome!
-
I did. Didint work. So weird
-
very strange indeed... almost like something is preventing it from running properly... or the window is being created off-screen
-
-
-
Is there any option besides freewallet?
-
It's a compressed privkey which can be derived any way one wants to: p2pkh, p2sh-p2wpkh, or p2wpkh.
-
I can import all three into electrum. But the actual key doesn't change. And freewallet gives me error if I try to include a prefix to tell it what type of script
-
It only let's me import the privkey by itself, and defaults to p2pkh
-
there is an issue open for importing bech32 private keys...
-
Private Key import fails · Issue #72 · jdogresorg/freewallet-desktop
p2wpkh key from Electrum fails to import (bech32)
-
Is indiesquare still a thing?
-
You should be using addresses generated in freewallet based off your 12-word passphrase and then you should have no issues
-
will work on importing segwit keys issue... but if you were just using addresses generated from your 12-word passphrase in freewallet or RPW or counterwallet, you wouldn't be having this issue with using a bech32 address
-
I understand. I have a pepe at a p2wpkh address tho and want to get it out
-
so.. please... going forward, use addresses in the wallet
-
I get it. I made a mistake
-
you will be able to eventually... but not tonight... only so many hours in the day... will get to the private key import issue in the coming weeks
-
I kinda realized before you explained exactly what I did wrong; now I fully understand
-
Ok so there's no solution, but if I'm patient eventually hopefully one will come up
-
Anything I can do to help
-
didn't mean to be harsh on ya... just saying, if ppl just used one 12-word passphrase and addresses in the wallet, wouldn't have issues like this... always the fringe cases that cuase headaches
-
One will be written, I mean, not come up
-
correct, it'll get fixed eventually... you should be able to import the private key.. need to dig into why it fails
-
but got some other stuff to work on first
-
Can I take a look and see? More to the point, can you tell me where in the code the problem might be occurring?
-
Not going to ask for priority on my perosnal issue, wouldn't mind trying to learn something while I hang tight tho
-
freewallet-desktop/js/freewallet-desktop.js at master · jdogresorg/freewallet-desktop
Desktop wallet for Win/Mac/Linux which supports Bitcoin and Counterparty - jdogresorg/freewallet-desktop
-
Cool ty
-
also take a look at this line
-
freewallet-desktop/js/freewallet-desktop.js at master · jdogresorg/freewallet-desktop
Desktop wallet for Win/Mac/Linux which supports Bitcoin and Counterparty - jdogresorg/freewallet-desktop
-
issue is prolly I am just using bitcore to import private keys... but should be using bitcoinjs to get the bech32 address... prolly just need to update the above mentioned function to include trying with bitcoinjs
-
Anytime I add a prefix, any of the three, if fails to import
-
and as i said its a compressed key, so it is the same regardless of the script
-
that's true for any privkey, even regular p2pkh ones from what I can tell
-
with the prefix, no problem, regardless of which type of script
-
without*
-
yeah... I think I only got import private keys working for regular addresses.. then added segwit support later and never circled back to update the import private key function to support segwit.
-
makes sense; and like i said if you don't have an ambiguous key that you need to specify what type of address, theres no issue
-
happy to accept pull requests... once I test and all looks good, will merge... if you get time to make the updates yourself 🙂
-
I'll see; rusty with js, but its all code
-
Not really, there is Monya Wallet which I can recommend.
-
Perhaps interesting: Seems like the bitcoin.org website has been hacked: https://github.com/bitcoin-dot-org/Bitcoin.org/issues/3743Bitcoin.org currently shows a scam modal · Issue #3743 · bitcoin-dot-org/Bitcoin.org
There is currently a scam modal appearing on Bitcoin.org telling people to send Bitcoin to the scammer's address. I would guess that the server hosting the website has been compromised as t...
-
Is it Apple?
Try to open and then go to:
Settings, security and privacy, allow.
Should be little button on bottom right. -
I just installed Freewallet and it seems it also installed a “NWJS” app, could that be a virus?
-
Nwjs is the browser wrapper…. It’s normal…. Nwjs.io
-
Glad to hear that, better be careful these days! do you recommend uploading our rarest NFTs to a hardware wallet and if yes, will it be compatible with Counterparty NFTs?
-
I will be adding hardware wallet support to freewallet in the coming months
-
In the future, send funds from a counterparty compatible wallet like freewallet.io and not from non-counterparty walllets... as to your question about private keys.... currently freewallet.io only supports importing legacy private keys (addresses that start with 1).. but I will be making updates in the next release to support importing other private keys... until then, your card is stuck in the address... again, use counterparty wallets in the future so you can avoid issues like this
-
yes, but the derivation path is diffrent in counterparty, so the BIP nemonic prolly wont access the same addresses as other wallets.
-
Use freewallet.io to create a dispenser... counterwallet.io has an issue with creating dispensers for no-divisible assets
-
Counterparty uses 12-words... dont try to use passphrases from other wallets... create a counterparty wallet using freewallet.io or counterwallet.io and use the 12-word passphrase
-
correct... counterparty uses a 12-word passphrase.... please stop trying to use seeds from other wallets... just create a new wallet on counterparty, write down your 12-word passphrase and use it
-
Is there any option on Counterparty wallets to choose BIP3.?
-
There I put but nothing happens
-
I would suggest not using bip39 at this time and just using the standard "counterwallet" word list... as then you can take the 12-words to other wallets like counterwallet.io and rarepepewallet.com and check addresses
-
One of wallet seed doesn’t work in any platform
-
Says Invalid seed but in FreeWallet when I paste seed on BIP3, it shows nothing
-
You should be using COUNTERPARTY compatible wallets and stop trying to import the wordlist elsewhere
-
use COUNTERPARTY wallets... and a COUNTERWALLET 12-word seed
-
you can always dump the private key from the COUNTERPARTY wallet and import into other wallets
-
I tried all these sir
-
but your creating headaches for yourself by using BIP passphrases
-
just go to counterwallet.io and create new wallet... or go to freewallet.io and create new wallet
-
by default it uses counterwallet format
-
from that point on, you can use all COUNTERPARTY wallets with no issues... and worst case, you can dump the PRIVATE KEY for any address and import into other wallets
-
I understand but first I need to import my cards from that wallet
-
people trying to use 12-word seeds in other formats will continue to have issues and cause me support headaches
-
if you just use a counterparty wallet and let it generate a 12-word passphrase without changing anything, it will work fine
-
if you use a BIP39 passphrase... 1.) you cant use it in other counterparty wallets.. and 2.) you cant import that passphrase into other wallets cuz the address derivation in counterparry is different
-
On Casa Tookan, and yes I have some funds
-
correct... again... STOP USING BIP
-
if you want to use a counterparty wallet
-
create a new wallet
-
and just use the default
-
creating headaches by trying to import seeds from other wallets
-
yes
-
except currently freewallet only supports legacy address private keys (addresses that start with 1)
-
When a wallet is not possible to open, then how is it possible to import private key??
-
hence why you should just use a COUNTERPARTY wallet and use the COUNTERWALLET format and you will have no issues... can access normal addresses and bech32 addresses and dump private keys and import into other wallets if needed
-
we are going in circles
-
I have repeated the same thing many times.... use a counterparty compatible wallet and just use the 12-words it gives you in counterwallet format.... stop trying to use BIP seeds from other wallets
-
it will not work as you think cuz the address derivation is different
-
so again, and last time... use a COUNTERPARTY wallet and COUNTERWALLET format
-
-
-
create new wallet... click.... click OK.. 2 clicks, dont change anything... easy peasy and you wont have issues
-
or try to do weird stuff like use BIP seeds from other wallets and get confused and stuck and suck up my time on support and explaining things
-
use counterparty wallets the default way and you will have no issues
-
-
-
in counterwallet click "Create new wallet"..... then click "continue"
-
easy peasy
-
not sure why people are overcomplicating things by trying to use BIP seeds and addresses from other wallets
-
early morning... just woke up.
-
not sure why cassa tookan uses a format other than counterwallet... but the 12-word passphrase there will not work in standard counterparty wallets.... so create a new wallet on freewallet.io or counterwallet.io using the counterwallet 12-word passphrase format... then you will not have any issues... apparently cant use same seed from casa tookan in freewallet/counterwallet
-
support for other private keys in freewallet.io is in the works and will be in next releaese.... but no, not gonna support 24-word nemonics... counterparty wallets use 12 words.... would just be creating more support headaches (as if I dont already have enough as evidenced by the last 15 minutes of chat) by allowing 24-words
-
please just use counterwallet format and 12-words
-
perfect.. thank you 🙂
-
getting frustrated and tired of doing support for all these fringe cases of ppl who don't want to just use the wallet as it was intended
-
got ya... adding support for importing bech32 addresses in the future... should be able to import private keys for it then 🙂
-
oh ya?... copy their usernames and LMK please
-
scammers gonna scam.... unfortunately nothinig I can do about it other than call them out... been a few lurking around trying to extract private keys and 12-word passphrases from ppl.... I WILL NEVER ask for your private keys or 12-word passphases... I also never DM first
-
address isnt validating? howso
-
address label is just some text phrase associated with the address... not used anywhere but in display
-
ahh... Let me go check your coindaddy.io support ticket and see whats up
-
LOL well there ya go
-
send the EXACT amount 😛
-
ok.. checking now
-
fixed now
-
for some reason my address validation script stopped running.... just had to remove a lockfile and re-run it again and poof it worked fine
-
thanks for the heads up
-
-
nope, same 12-word passphrase should generate and access the exact same addresses on freewallet.io, rarepepewallet.com, and counterwallet.io
-
cards that are escrowed in dispensers and on the DEX are not shown in holders list
-
How much is bitcorn now?
-
hearing 25 cents each?
-
is that true??
-
Loonardo Joe Vinci
it's going to be embarrassing for @jack when the team rolls out support for ETH NFTs only twitter.com/CoinDesk/statu…
-
please give it some love
-
So CP NFTs? Or?
-
We could sign on Twitter to authenticate the user actually holds the NFT
-
if I made a mistake with an asset name, if I destroy the supply does the asset name get removed from my assets? -
can I remove an asset ?
-
once an asset name is registered, you own that asset name... however if you messed up and issued too much supply, you can destroy the supply and the supply will be reduced.. there is no way to "remove an assset"
-
ok
-
Please tell me how to restore "removed address" with CounterPartywallet. -
Show QR code
Remove Address ←
Sort By
・・・
・・・ -
- 24 September 2021 (168 messages)
-
what wallet are you speaking of? counterwallet.io and freewallet.io and rarepepewallet.com don't have any "remove address" feature
-
sorry.Monaparty
-
Is there/will there be a market for XCP asset names? -
this is a room for Counterparty... you should ask your question in the monaparty room 🙂👍
-
You can check out coindaddy.io where you can list any asset names you have for sale and accept/reject bids to buy the asset names.
-
OK.I apologize for the trouble.
-
-
Jdog my wife saving pictures for you 😂
-
Cool! I wonder if brands/celebrities/companies will recognise the value of them in the future if “NFTs” become mainstream. I hope ETH doesn’t dominate the space forever - too many hidden gems on Counterparty.
-
General public will want Bitcoin art IMO.
No one mentions this. But go ask anyone who doesn’t know anything about blockchain and ask them why type of art token they want. -
hehehe 🙂
-
They all say Bitcoin.
Doge might be a high choice among the younger generation now though.
If doge had NFTs 😆 -
I certainly hope so.. I registered many thousands of assets years ago that I am squatting on and waiting to sell to buyers in the future if/when they see the value of counterparty assets.. or named tokens on Bitcoin 🙂
-
dont think you can do mp4s yet that I am aware of
Official Counterparty Chat
Public archive of Telegram messages.
- 01 Sep 2021 (219)
- 02 Sep 2021 (102)
- 03 Sep 2021 (73)
- 04 Sep 2021 (95)
- 05 Sep 2021 (45)
- 06 Sep 2021 (53)
- 07 Sep 2021 (12)
- 08 Sep 2021 (45)
- 09 Sep 2021 (36)
- 10 Sep 2021 (52)
- 11 Sep 2021 (44)
- 12 Sep 2021 (238)
- 13 Sep 2021 (128)
- 14 Sep 2021 (63)
- 15 Sep 2021 (115)
- 16 Sep 2021 (268)
- 17 Sep 2021 (100)
- 18 Sep 2021 (164)
- 19 Sep 2021 (101)
- 20 Sep 2021 (127)
- 21 Sep 2021 (64)
- 22 Sep 2021 (112)
- 23 Sep 2021 (226)
- 24 Sep 2021 (168)
- 25 Sep 2021 (86)
- 26 Sep 2021 (56)
- 27 Sep 2021 (104)
- 28 Sep 2021 (65)
- 29 Sep 2021 (105)
- 30 Sep 2021 (117)